Characteristics of RG18 Rapid Closed Tank Used in Hongyi Coal Mine

Description :

　　Quick sealed tank for coal mines, RG-18 quick sealed tank, RG-15 portable quick sealed tank

　　Quick sealed tank for coal minesMotivate us to produce, success lies on the other side, achievementQuick sealed tank for coal minesPerformance, the following is an introductionRG-18Quick sealed tankparameter

　　RG-18Quick sealed tankBased on two components: resin and catalyst.

　　Two components are separately installed in a steel tank under pressure, mixed and stirred, and sprayed using a specialized spray gun. After spraying, they quickly form without falling off or cracking.

　　Quick sealed tank for coal minesProduct Features:

　　Suitable for simple and fast use

　　Good bonding performance

　　RG-18Quick sealed tankGood flame retardant performance

　　Sealing can be achieved after spraying

　　good flexibility

　　Quick sealed tank for coal minesCharacteristics:

　　1. The curing time can be adjusted, and the compressive strength after curing is high, up to 100MPa (customized according to customer requirements).

　　two RG-18Quick sealed tankSolvent free, high flash point, high flame retardant, material internal reaction temperature less than 140 degrees

　　3. It has good adhesion to the construction base surface of rock layers, coal seams, etc.

　　4. The consolidated body has good toughness and does not crack when compressed by 20-30%. It can fully adapt to the deformation of rock mass and coal seam. Once consolidated, it quickly strengthens the fractured matrix.

　　Below is an introductionQuick sealed tank for coal minesSome technical parameters:

　　1. The spraying area is 10-20 square meters

　　2RG-18 quick sealed tankThe curing time is between 5-30 seconds

　　3. The bonding strength is 2-4mpa

　　4. The closure rate is greater than or equal to 98%

　　5. The weight of RG-18 quick sealed tank is about 18 kilograms

　　6. The storage time at room temperature is about 6 months

　　Quick sealed tank for coal minesProduct Features

　　RG-18Quick sealed tankIt is composed of two components, A and B, mixed evenly in a certain proportion, stirred by compressed air, sprayed evenly and continuously on the surface of the target through the nozzle, and chemical reaction can take place in a short time. After a few seconds, the liquid will become solid, and a solid foam plastic coating will be formed on the surface of the attachment.

AfterSalesService :

• Quick sealed tank for coal mines