Transportation Requirements for Hard Explosion proof Water Tank of GS60 Explosion proof Water Tank for Hongyi Mining

Description :

　　GS60Explosion proof sink, Explosion proof sink, GS Explosion proof sink

　　Only with dedication can we create good thingsGS60 explosion-proof water tankCompetition is the key to development.GS60 explosion-proof water tankWe provide good service, fast delivery, and bring you good medical examinations.Explosion proof water tankWelcome to purchase.

　　GS60Explosion proof water tankInstallation method:

　　1Explosion proof water tankInstall according to regulations, assign daily management responsibilities to individuals, implement hanging management, and the instruction board for explosion-proof water tanks should indicate the installation location, water tank type, shed area length, tunnel section, number of water bags, water bag capacity, design water volume, actual water volume, management unit, and management personnel.

　　2. The vertical distance between the edge of the water bag and the roadway wall, support, and roof (beam) shall not be less than 0.1 m, and the distance between the water bag and the roof (beam) shall not be greater than 1.0 m.

　　3. The sum of the gap between water bags and the gap between water bags and the support or roadway wall shall not exceed 1.5m, and shall not exceed 1.8m. The gap between water bags in the same row (column) shall not be less than 0.1m, and the gap shall not exceed 1.2m.

　　4. The water tank is installed at the top of the tunnel, and the water bags are arranged in a horizontal hanging manner. The distance between the water tank and the tunnel rail surface should not be less than 1.8m, and the water tank should be kept at the same height.

　　GS60Explosion proof water tankTechnical Requirements

　　(1) The pressure required for breaking the sink (expressed as static pressure) shall not exceed 16 kPa; The pressure required for the action of the water bag (expressed as static pressure) shall not exceed 12kPa;

　　(2) The action time for forming water mist shall not exceed 150ms;

　　(3) TheGS60 explosion-proof water tankDuration of water mist: not less than 250ms for the sink and not less than 160ms for the water bag;

　　(4) The dispersion length of water mist shall not be less than 5m;

　　(5) The dispersion width of water mist shall not be less than 3.5m;

　　(6) The dispersion height of water mist shall not be less than 3m.

　　GS60Explosion proof water tankTransportation:

　　During transportation, the sink should be protected from mechanical impact and friction, as well as from direct sunlight and rain.

　　2. The product packaging should comply with the relevant regulations for railway and road transportation (100 sinks per package, packaged in woven bags). 60L explosion-proof water tank

　　three GS60Explosion proof water tankIt has the function of flame retardant or flame retardant anti-static, and it should have the bearing capacity to carry the corresponding capacity of water without leakage.

　　four GS60Explosion proof water tankThe product should be stored in a well ventilated warehouse, and the stacking should not be too high to avoid affecting the quality of use. It is forbidden to come into contact with substances that damage the quality of rubber and plastic, and to avoid direct sunlight and rain. The storage temperature should be between -15 ℃ and 35 ℃, with a relative temperature between 40-80%, and at a distance of 1m from the heat source.

　　5. Tighten and hang the sink firmly, with even force, and hang every buckle without omission. Welcome all marketing departments, companies, and coal mines to compare quality and purchase. Special shaped industrial plastic nylon accessories, produced by molding and injection molding. For customers who distribute and use our company's products without any worries.

　　6. According to different requirements, make sinks with different volume specifications, and make corresponding wind buckles on both sides to facilitate the installation and replacement of S-shaped movable hooks inside the sink shed. Iron bars of corresponding specifications need to be inserted on both sides of the sink to increase its load-bearing capacity

　　We believe we can do it wellGS60 explosion-proof water tankThis product is more important than its own effort, hardExplosion proof water tankGood quality, there will be no water leakage.

AfterSalesService :

• GS60 explosion-proof water tank