Hongyi supplies MQG-260 anchor bolt cutters with small volume and light weight for coal mines

Description :

　　MQG-260Anchor rod cutter, coal mine anchor rod cutter, multifunctional hydraulic shear

　　MQG-260Anchor rod cutterMotivate us to produce, success lies on the other side, achievementMQG-260 Anchor Cutting DevicePerformance, the following is an introductionCoal mine anchor rod cutterparameter

　　MQG-260Anchor rod cutterPurpose:

　　When excavating and repairing coal mine tunnels, the mining anchor rod cutter (steel bar cutter) is used to adjust the length of the anchor rod (steel bar), which can safely and quickly cut high-strength anchor rods (steel bars) with a diameter of less than 24 mm; At the same time, the problem of rapid roof caving in the intake area, old pond, goaf, return air area, and downhill corner has been solved, reducing the accumulation of gas and coal dust and preventing hidden dangers of gas and coal dust accumulation.

　　MQG-260Anchor rod cutterFeatures:

　　Anchor bar cutter (steel bar cutter) has a small volume, light weight, high shear force, equipped with a cutting head, fast cutting and durable

　　MQG-260Anchor rod cutterParameters;

　　Parameter/Model MQG-260

　　Rated oil pressure 63Mpa

　　Rated shear force 260KN

　　Weight (including oil) 16Kg

　　Shear anchor rod diameter ≤ 24mm

　　MQG-260Anchor rod cutterProduct Features:

　　Anchor bar cutters (steel bar cutters) are small in size, light in weight, have high shear force, and are equipped with cutting heads. They cut quickly and are durable.

　　characteristics

　　MQG-260Anchor rod cutterPrecautions

　　1. When cutting off the anchor rod head, fasten the anchor rod nut cutter onto the anchor rod head, make the blade perpendicular to the axis of the anchor rod, align it with the position to be cut, and use the oil pump to supply oil and pressure to cut off the anchor rod head.

　　2. When cutting the nut at the head of the anchor rod, fasten the bottom of the cutting blade of the anchor rod nut cutter onto the nut, so that the double blades are parallel to the axis of the nut, and allow the blade to cut the side of the nut, so that the oil pump can supply oil and pressure, which can cut the nut in half and fall off.

AfterSalesService :

• Anchor rod cutter