Operation Instructions for MQS-19 Anchor Cable Cutting Device 2020 MQS-22 Anchor Cable Steel Strand Cutting Device

Description :

　　MQS-19Anchor cable cutter, MQS-22 anchor cable steel strand cutter, mining anchor cable cutter

　　pioneerMQS-19 Anchor Cable Cutting DeviceMarket success relies on friends, growth relies on competitors, and achievement relies on a team,MQS-19 Anchor Cable Cutting DevicePlease identify Hongyi.MQS-22 anchor cable steel strand cutterSuccess is not easy, we need to double our efforts

　　MQS-19Anchor cable cutterOverview

　　Anchor cable cutters are divided into mining anchor cable cutters and engineering anchor cable cutters. The anchor cable cutters developed and designed by our unit are mainly used for cutting mining anchor cables and steel strand cutters. In the excavation and support of coal mine tunnels, the mining anchor cable (steel strand) cutter can quickly cut off long exposed anchor cables during installation. The mining anchor cable (steel strand) cutter is lightweight, easy to operate, equipped with a blade, fast to cut, and durable. High work efficiency and easy to use.

　　MQS-19Anchor cable cutterMain parameters:

　　Parameters/Model MQS15-190MQS18-290 MQS19-350 MQS22-350

　　Rated cutting force 190KN 290KN 350KN 350KN

　　Applicable steel strand diameter 15.24mm 17.80mm 18.9mm 21.6mm

　　Travel distance 28mm 28mm 32mm 32mm

　　Rated oil pressure 63Mpa 63Mpa 63Mpa 63Mpa

　　Weight (including oil) 12kg 15kg 18kg 18kg

　　MQS-19Anchor cable cutterInstructions for use and operation

　　Before use, the oil pump should be filled with 90% hydraulic oil (N46 # wear-resistant hydraulic oil), and then the tensioner and oil pump should be connected with high-pressure oil pipes. The oil pump reversing valve handle should be turned to one side, and the handle should be shaken up and down to check whether the oil pump pressure gauge shows pressure and whether the cut-off piston is in motion. This means that the oil cylinder should be cycled back and forth several times without load to discharge the gas in the hydraulic circuit. Check for oil leakage and other abnormal phenomena before use.

　　Insert the anchor cable through the cutting hole of the cutter during use, and operate the manual oil pump until the anchor cable is cut off.

　　Note:MQS-19 Anchor Cable Cutting DeviceNo one is allowed to stand opposite the cutting hole to prevent the cut steel strand from bursting out and injuring people!

AfterSalesService :

• Anchor cable cutter