GVD30 tear sensor mining tear tape alarm GVD30&# 40; A) Tear sensor GVD20 protective belt

Description :

　　GVD30Tear sensor mining tear belt alarm GVD30 (A) Tear sensor GVD20 protects belt conveyor

　　GVD30Tear sensor GVD30 (A) Tear sensor GVD20 Tear sensor

　　What kind of products there are, what kind of customers there are,GVD20GVD30 (A) GVD30 Mining Tear SensorAttracting a high-end customer base through product quality,GVD20GVD30 (A) GVD30GVD30 Mining Tear SensorCustomer satisfaction feedback has always demanded that we never forget our original intention and strive for excellence. Whatever kind of product we have, there will be a certain kind of enterprise. Hongyi Technology has a full range of specifications for mining tear sensors. Welcome to inquire.

　　1GVD20GVD30 (A) GVD30 Mining Tear SensorDebugging:

　　Install the tear sensor under the belt, and connect the two lead wires to the "grounding" and "tear tape" interfaces of the KHP-Z belt conveyor comprehensive protection device host. When the belt conveyor is running normally, gently press the tear sensor sensing surface with your hand, and the belt conveyor should stop. The "tear tape" indicator light on the monitoring instrument host panel should light up, and a loud "tear tape" language alarm sound should be emitted IIGVD20GVD30 (A) GVD30 Mining Tear SensorProduct Features

　　The tear sensor has a small volume, light weight, and is easy to install; Stable performance and low maintenance.

　　IIIGVD20GVD30 (A) GVD30 Mining Tear SensorMain technical parameters

　　1. Contact capacity: DC12V/0.5A.

　　2. Output signal: normally open passive contact: 1 pair.

　　3. Action force: When the action force reaches a pressure of (20 ± 5) Kg/m2, the two output terminals of the sensor are connected.

　　4. Action performance: When the sensor is subjected to a force not less than the action force, the two output terminals of the sensor are connected. When the force is removed, the two output terminals of the sensor are disconnected, and the contact resistance step when disconnected is less than 100K Ω.

　　4GVD20GVD30 (A) GVD30 Mining Tear Sensorintroduction

　　The GVD30 tear sensor is an intrinsically safe electrical equipment for mining, suitable for use in underground coal mines, open-pit coal mines, coal preparation plants and other workplaces. It is used as a longitudinal tear protection for belt conveyors

　　5、 GVD20GVD30 (A) GVD30 Mining Tear SensorThe working principle is:

　　Using the principle of electromagnetic induction, the receiver receives the electromagnetic pulse signal generated by the generator through the sensing coil. When the conveyor belt is longitudinally torn, the sensing coil is cut off, and the receiver will not receive the electromagnetic pulse signal, thus generating a longitudinal tearing signal of the conveyor belt, and then sending an alarm signal to stop the conveyor from running.

　　The above introduction is only a partial model of the comprehensive protection device for belt conveyors. user-friendlyGVD20GVD30 (A) GVD30 Mining Tear SensorIt is not through reckless and reckless sales, nor can it be reflected in the words of business personnel.GVD20GVD30 (A) GVD30 Mining Tear Sensor ManufacturerIt has grown through the ups and downs of the market economy and the trials and tribulations of wind and rain. If you want to knowMining tear sensorFor more models and prices, you can contact Xiao Zhang from Hongyi Technology. We can add a W letter and I will provide you with comprehensive introduction and suggestions.

AfterSalesService :

• GVD30 tear sensor