1kg mining sealed bag, two-component sealed bag, 1kg Malisan sealed bag, Hongyi manufacturer, 1kg

Description :

　　1kgMining sealing bag, two-component sealing bag, 1kg Malisan sealing bag, Hongyi manufacturer, 1kg

　　11kg mining sealing bagScope of application:

　　1kgMa Li loose sealed hole bagSuitable for sealing gas extraction boreholes, sealing gas pressure measuring holes, fixing various orifice pipes, and fixing underground drainage holes

　　Malisan sealing bag is a process simplification and improvement of grouting sealing technology. It adopts a connected bag structure to prefabricate Malisan two-component materials for packaging. When used on site, the mixed reaction of the material relies on its excellent bonding, expansion, and sealing properties to achieve rapid sealing of drilling holes. Moreover, relying on the expansion pressure generated by the reaction of Malisan materials to achieve pressurized sealing of holes increases the sealing effect and improves the negative pressure of pumping.

　　II1kg mining sealing bagTechnical indicators:

　　11kg Malisan Sealed Hole Bag500g sealed bag resin, 500g catalyst

　　2. Sealing bag reaction time

　　The reaction of the sealed bag when the material temperature is 20 ° C is shown in the table below

　　Project indicators

　　Rubbing time 10 "-20"

　　The reaction time can be adjusted to 2 ′ 00 ″

　　Foam to fill the sealed bag for 3'00 "

　　Sealing bag burst time 4 ′ 00 ″

　　The end time of the reaction is 10 ′ 00 ″, and there is still adjustable liquidity

　　Hardening time 60 ′ 00 ″

　　III1kg mining sealing bagHow to seal the hole:

　　1kgMa Li loose sealed hole bagIncluding the bag body and isolation strip, the isolation strip passes through the bag body and divides it into two independent parts. The isolation strip can be extracted from the bag body. When using, pull out the isolation strip to make the two separated parts communicate. Quickly shake or rub the two liquids in the bag repeatedly to fully mix the Malisan A and B components. Then fix it on the drainage pipe immediately, and quickly send the drainage pipe together with the hole sealing bag into the hole. After 5 minutes, the hole sealing bag will expand and explode in the hole, producing foam like reactants that quickly fill the gap between the drainage hole and the drainage pipe, and can penetrate into the seam of the coal (rock) layer to achieve good sealing effect.

AfterSalesService :

• Mining sealing bag