Hongyi LKJ-26 Hydraulic Scissor with Flexible Use, 26mm Hydraulic Clipper, Lightweight

Description :

　　LKJ-26Chain hydraulic shear, 26mm hydraulic shear, chain hydraulic shear manufacturer

　　LKJ-26Loop chain hydraulic shearGood quality is more important than cost,LKJ-26 ring chain hydraulic shearEntering the world of quality brings infinite business opportunities. procurement26mm hydraulic shearMore communication, less complaints; More understanding, less dispute.

　　LKJ-26Loop chain hydraulic shearIntroduction:

　　26mmHydraulic ClipperIt is an advanced cutting tool mainly used for cutting the circular chain of mining transport aircraft, and can also be used for cutting other round steel bars. The circular chain is connected to form a cable chain, and when the length of the cable chain changes, a certain section of the circular chain needs to be removed.

　　LKJ-26Loop chain hydraulic shearProduct Usage26mm hydraulic shearMainly used for cutting anchor chains (circular chains) in various industrial and mining, metallurgical, petroleum, bridge, fire protection and other departments.

　　LKJ-26Loop chain hydraulic shearProduct features: This device has a split structure, with small size, light weight, easy operation, flexible use, and high cutting force; It is worth mentioning that receiving the anchor chain cutter does not require the use of power and is more suitable for field work.

　　LKJ-26Loop chain hydraulic shearMain technical performance parameters:

　　Cut off object: circular chain below Φ 34 × 126

　　Work schedule: 32 (mm)

　　Cutting force: 800 (KN)

　　Length: 255 × 130 × 450 (mm)

　　Work pressure: 63 (MPa)

　　Weight: 51 (kg)

　　LKJ-26Loop chain hydraulic shearUsage and precautions:

　　1. This series of products is used to cut various anchor chains (circular chains) metal materials with a diameter of 26-40mm. Adjust the bolt according to the diameter of the anchor chain (circular chain) during use, and place the anchor chain (circular chain) at a right angle to the blade

　　2. Check the oil level: If the oil level is insufficient, the performance of the machine cannot be fully utilized. Some abnormal situations such as poor performance of major movements are caused by insufficient fuel.

　　3. Use 32 # anti-wear hydraulic oil or 10 # transformer oil in the oil cylinder. When refueling, you can remove the rubber protective sleeve at the rear of the oil pump and then unscrew the 8mm hex socket screw to open the oil outlet pipe

　　When there is a load, do not remove the quick connector to avoid accidents and damage to the components

　　five LKJ-26Loop chain hydraulic shearIf there is a phenomenon of empty tapping during use, you can first loosen the oil drain screw on the pump body, lift the pump body vertically and tap it downwards a few times, then tighten the oil drain screw, and continue to use

　　six 26mmHydraulic ClipperWhen using, first fill the manual pump with 32 # anti-wear hydraulic oil, then connect the quick connector of the manual pump to the main oil cylinder, and tighten the oil drain screw on the oil pump to start working. Similarly, when the work is completed, loosen the oil drain screw and the working oil cylinder will automatically retract

　　7. Before use, empty back a few working strokes and wait for each part to move flexibly without oil leakage before use.

AfterSalesService :

• Loop chain hydraulic shear