LKJ-34 Ring Chain Hydraulic Scissor Operation Method 34mm Ring Chain Clipper Manual

Description :

　　LKJ-34Ring chain hydraulic shear, 34mm ring chain cutter, ring chain cutter

　　guaranteeLKJ-34 ring chain hydraulic shearQuality is our promise to you. weLKJ-34 ring chain hydraulic shearSurvival through quality, development through quality, and efficiency through quality. Below is a brief introduction34mm circular chain cutter.

　　Produced by the companyLKJ-34 ring chain hydraulic shearMainly used for cutting anchor chains (circular chains) in various industrial and mining, metallurgical, petroleum, bridge, fire protection and other departments. This machine adopts a split structure, which has the advantages of small size, light weight, easy operation, flexible use, and high cutting force. Especially, the manual anchor chain (circular chain) cutter does not require a power supply, making it more suitable for field operations.

　　LKJ-34Loop chain hydraulic shearProduct Features:

　　34mmCircular chain cutterSpecially designed for cutting open circular chains, with short working time, easy operation, reduced work intensity, and improved work efficiency. This product features a detachable fixed blade that can be re sharpened or replaced; The application of double acting hydraulic cylinders ensures a safe and reliable working process. When used in conjunction with our SDB series manual oil pump, KZDB, STDB series electric oil pump, and FDB series pneumatic oil pump, it can maximize its efficiency.

　　LKJ-34Loop chain hydraulic shearTechnical Specifications

　　Model Link Diameter mm Cutting Force Working Pressure Handle Operating Force Weight KG

　　LKJ26 Φ26 2 5Ｔ 4０Ｍpa ≤４５Kg 38

　　LKJ34 Φ34 5 0Ｔ 42Mpa ≤４５Kg 45

　　LKJ42 Φ42 8 0Ｔ 63Mpa ≤４５Kg 50

　　LKJ-34Loop chain hydraulic shearFunction, composition, and principle of use:

　　34mmCircular chain cutterMainly used as a cutting tool for anchor chains (circular chains) in various industrial and mining, metallurgical, petroleum, bridge, fire protection and other departments. The LKJ-26 ring chain hydraulic shear includes a fixture. When using the LKJ-26 (SMJ) hydraulic chain shear, first place the sheared chain link into the chain groove, and then inject high-pressure liquid into the cylinder body. Under the action of hydraulic pressure, the plunger pushes the moving blade to move, and cooperates with the static blade to form a shear force to cut off the circular chain. The hydraulic safety shear of the circular chain can cut various specifications of mining circular chains with a diameter of less than 40mm, making it an ideal tool for cutting circular chains.

　　LKJ-34Loop chain hydraulic shearDismantling and installation of cutting tools

　　1) Fixed blade: Use a 6mm hex wrench to remove the fixed blade fixing screw 2 to remove the fixed blade 3. The installation sequence is opposite to this.

　　2) Moving knife: Unscrew the moving knife guide screw 4, 3) Unscrew the cylinder block 11, 4) Unscrew the moving knife connecting screw 6, 5) The moving knife blade 5 can be removed immediately. The installation sequence is opposite to this. During installation, pay attention to keeping all workpieces clean. 6) Apply lubricating grease to the mating parts. 7) Do not use the moving blade 5. 8) It should interfere with the moving blade guide screw 4. After installation, 9) empty load reciprocating 10) walk several times, 11) remove the air in the hydraulic oil circuit before use.

　　LKJ-34Loop chain hydraulic shearOperation Method

　　Translate into English34mm circular chain cutterConnect the high-pressure hose to the oil pump. Place the chain into the hydraulic shearing station as shown in the diagram below. Rotate the oil pump reversing handle to put it in the loading state, and after the oil pump is loaded, the hydraulic shear blade of the ring chain begins to cut the ring chain. After the circular chain is cut off, stop the oil pump loading and place the reversing handle in the unloading state. Return the hydraulic shear blade of the circular chain to the bottom, stop the oil pump unloading and place the reversing handle in the middle state. Then remove the circular chain and move the hydraulic shear of the circular chain to the next station. Attention: When the circular chain is cut, the cut part will cause splashing towards the outside. Please be sure to ask the operator to pay attention to safety!!!

AfterSalesService :

• Loop chain hydraulic shear