Hongyi KSP5 wet concrete spraying machine for construction sites

Description :

　　KSP5Wet concrete spraying machine, wet concrete spraying machine, slope protection spraying machine

　　We doKSP5 wet concrete spraying machineQuality is produced, not inspected. We make itKSP5 wet concrete spraying machineFully understand the customer's needs, faults, complaints, and grievances,Wet type concrete spraying machineGood quality, more affordable economy

　　KSP-5Wet concrete spraying machinemain purpose

　　KSP-5Wet concrete spraying machineIt is a process of mixing a certain proportion of cement, sand, and stone using compressed air as power. The mixture is then compressed through a pipeline and sprayed onto the roadway surface at high speed, where it solidifies and hardens to provide support. The main function is to spray concrete made of a mixture of sand, cement, and gravel, but the diameter of the gravel should be within 20mm to ensure smooth spraying.

　　KSP-5Wet concrete spraying machineTechnical Specifications

　　Machine production capacity of 5m3/h

　　Concrete mix ratio 1:4-5C/A

　　Loading height 1.1m

　　The water cement ratio of the material used is ≤ 0.4

　　Voltage level 380V

　　Transport distance 30m

　　Aggregate particle size Φ 15mm

　　Inner diameter of material conveying pipe Φ 50mm

　　The total weight of the machine is 700kg

　　Working wind pressure 0.2-0.4Mpa

　　Air consumption 7-8m3/min

　　Electric motor power 5.5KW

　　KSP-5Wet concrete spraying machineworking principle

　　The structure and working principle of the sprayer: The mixed material is fed into the sprayer hopper through a vibrating screen from the discharge port of the mixer (or manually mixed and loaded), and is then moved into the direct feeding chamber of the rotor by the feeder to follow the rotating rain vortex to the discharge port. Compressed air is introduced from the air chamber here, blowing the material into the discharge elbow. Another wind pressure is introduced by the cyclone, which disperses and accelerates the material in a multi head wind spiral state, causing it to rotate and float. It enters the conveying pipe and reaches the nozzle, where a small amount of supplementary water (during wet spraying) or liquid accelerator (during wet spraying) is added and sprayed out.

　　KSP-5Wet concrete spraying machineadvantage

　　1. Directly connected rotor type non bonded material chamber, smooth discharge, time-saving;

　　2. Four point elastic compensation compression, good sealing effect, less dust near the machine, and long service life of vulnerable parts;

　　three KSP-5Wet concrete spraying machineAdopting low-pressure high-speed vortex airflow transportation to overcome problems such as adhesion, pipe blockage, and pulse separation in material transportation, the material flow is uniform, continuous, and stable;

　　4. New nozzle and discharge elbow device improve spraying effect, with less rebound and high spraying layer quality.

　　KSP-5Wet concrete spraying machinePrecautions for use

　　1. During the spraying operation, the machine operator should always pay attention to the liquid level gauge and pressure gauge of the liquid accelerator tank, and add the accelerator in a timely manner (if the accelerator is corrosive, the specific operator should wear labor protection equipment before operation, and in case of splashing on the skin, rinse with water as soon as possible to avoid skin burns).

　　2. When the machine is running, it is strictly prohibited to use metal sticks to clean the hopper to avoid accidentally dropping hard objects into the material chamber and causing mechanical and electrical accidents.

　　3KSP5 wet concrete spraying machineWhen washing the machine with water, pay attention to the protection of electrical appliances. You can sprinkle water on the appliances to prevent them from getting damp and causing short circuits.

　　4. After completing the homework, the remaining accelerator should be released to avoid sedimentation. Rinse the rapid setting agent tank with clean water every 3-5 days.

　　5. Once the pipe is blocked during operation, the valve should be immediately closed and the machine should be stopped. When disassembling the pipeline, the operation can only be carried out after the air pressure inside the pipe is zero.

AfterSalesService :

• KSP5 wet concrete spraying machine