YT4-6A hydraulic slider mining manual slider YT4-8A hydraulic slider labor-saving and cost-effective

Description :

　　YT4-6AHydraulic Pusher YT4-8A Mining Manual Mover Hydraulic Pusher Effortless and Cost Effective

　　YT4-6A hydraulic slider YT4-8A hydraulic slider mining hydraulic slider

　　YT4-6AHydraulic Pusher Mining Manual MoverStrict inspection and rigorous verification, YT4-8AHydraulic sliding device is labor-saving and cost-effectiveStrive for perfection, work together, and improveYT4-6A hydraulic sliderQuality, everyone has dedicated time, work has procedures,YT4-8A hydraulic sliderCheck with standards and keep evidence.

　　1YT4-6A hydraulic slider YT4-8A hydraulic sliderUsage and advantages:

　　YT4-6AHydraulic slider YT4-8A hydraulic slider(also known as a sliding jack) is a hydraulic mechanism with dual action of internal return fluid. It can achieve the movement of SGW-150C and SGWD-180P scraper conveyors in coal mine underground blasting mining faces or general YT4-6A hydraulic pusher mechanical mining faces. If the support and other parts are replaced, it can also be used for the movement of the coal scraper. In addition, the recovery of pillars in the coal mining face can still be completed. Hydraulic sliding device is a manual sliding tool designed to meet the needs of coal mine blasting and general mining working faces. Compared with other moving equipment, it has strong adaptability, good maneuverability, easy operation, high efficiency, easy maintenance, safety and reliability. Compared with hydraulic jacks with centralized oil supply, it can save a lot of investment and is economically cost-effective.

　　IIYT4-6A hydraulic slider YT4-8A hydraulic sliderParameter introduction:

　　Specification and model YT4-6A YT4-8A

　　Travel mm 600 800

　　Dimensions mm 855 * 135 * 210 1055 * 135 * 210

　　Whole machine weight kg 3.3 3.8

　　Rated thrust KN 39.2 39.2

　　Handle lifting mm 7 7

　　Handle pressed down mm 10 10

　　Power multiplier 90 90

　　Rated recycling tension KN 9.3 9.3

　　Pushing speed mm 17 17

　　IIIYT4-6A hydraulic slider YT4-8A hydraulic sliderStructural features:

　　The structure of YT4-6A hydraulic slider consists of front and rear hydraulic valves fixed in the same direction on the outer wall of the cylinder body, and positioning shafts fixed on opposite sides of the cylinder body outer wall between the two valves; The cylinder body is located in the longitudinal long hole on the fixed seat through the positioning shaft; The bottom of the fixed seat is fixed with a bottom plate, which is lifted upwards near one end of the piston rod; The top of the fixed seat is fixed with a choke seat, and the groove shaped structure on the upper part of the choke seat tilts backwards and forms an angle of 20 ° -24 ° with the horizontal plane.YT4-8A hydraulic sliderThe design of the utility model is reasonable, the hydraulic injection and injection are separated from the cylinder body, the pusher is easy to move, and the two ends of the cylinder body are adjustable; The piston rod can make normal contact with the coal blocking plate when connected, extending the service life of the equipment.

　　graspYT4-6A hydraulic pusher for mining manual sliderDetail oriented, focusing on basis, committed to improvement, and strengtheningYT4-6A hydraulic sliderCompetitive awareness, fostering team spirit,YT4-8A hydraulic sliderQuality control is done by everyone, and we have confidence in excellent quality. Shandong Hongyi looks forward to your inquiries and cooperation!

AfterSalesService :

• Hydraulic slider