FW-2 High Negative Pressure Gas Sampler - Special Tool for Gas Sampling in Negative Pressure State

Description :

　　FW-2High negative pressure gas sampler for collecting gas in negative pressure state, specialized tool for gas sampling

　　FW-2 High Negative Pressure Gas Sampler Gas Sampler

　　FW-2High negative pressure gas sampler collects gas in negative pressure stateIn addition, quality can earn market trust,FW-2High negative pressure gas samplerAdding service can win customer satisfaction, seek enterprise development through continuous improvement, establish enterprise brand through better management, study gas samplers seriously, and climb new heights.

　　1FW-2 high negative pressure gas samplerThe structure consists of components such as an intake joint, an exhaust joint, a rubber plug valve, a pull rod, a piston, an air cylinder, and a sealing ring.

　　IIFW-2 high negative pressure gas samplerProduct Technical Parameters

　　1. Medium temperature -10~100 ℃

　　2. Gas extraction volume 126mmL

　　3. Negative pressure of gas intake: 0-85KPa

　　4 mass 1.3kg

　　5 Dimensions 280 * 50 * 70mm

　　IIIFW-2 high negative pressure gas samplerPurpose: Used as a specialized tool for extracting gas pipeline systems and collecting gas samples under negative pressure conditions. Its structure is simple, easy to operate, and has a wide range of uses. This device consists of components such as an intake joint, an exhaust joint, a rubber plug valve, a pull rod, a piston, an air cylinder, and a sealing ring.

　　4FW-2 high negative pressure gas samplerPrecautions for use:

　　1. Before use, check if the rubber plug valve is sealed. If there is any damage or air leakage, it should be replaced in a timely manner.

　　2. The latex tube on the core valve should be approximately equal in length to the copper core.

　　3. Regularly apply Vaseline oil to the piston and cylinder to prevent rust and corrosion.

　　5FW-2 high negative pressure gas samplerUsage:

　　1. Before taking the gas sample, the intake port on the side of the sampler should be connected to the orifice plate flow measurement nozzle at the inlet end; Connect the top air outlet to the gas detector.

　　2. When extracting air, the rubber plug valve in the side intake joint automatically opens, and high negative pressure gas flows into the gas cylinder.

　　3. When inflating, the piston should be quickly pushed to open the core valve in the top outlet joint, and the rubber plug valve in the side inlet joint should automatically close. Gas flows into the high concentration gas detector, and the gas concentration is measured accordingly.

　　Shandong Hongyi maintains a good production atmosphere,FW-2High negative pressure gas samplerHaving advantages in doing so, everyone thinks about it and researches improvement measures,FW-2High negative pressure gas samplerThe quality of the work is guaranteed, give it a try, persistently work hard, develop healthily, and firmly grasp the production of quality. Shandong Hongyi looks forward to your inquiries and cooperation!

AfterSalesService :

• High negative pressure gas sampler