YQD-245 hydraulic lift is easy to use and YQD-147 hydraulic lift is not expensive

Description :

　　YQD-245Hydraulic lifting device is easy to use YQD-147 hydraulic lifting device is not expensive lifting machine

　　Hydraulic lifting device 25T hydraulic lifting device 15T hydraulic lifting device manufacturer YQD245 hydraulic lifting device price YQD147 hydraulic lifting device 30T hydraulic lifting device usage method hydraulic lifting device lifting height hydraulic lifting device lifting weight

　　Once a company stands on the wave of innovation, there is only one way to sustain it, which is to continue innovating.

　　1YQD-245 hydraulic lift, YQD147 hydraulic liftNotes:

　　When the lifting wheel rises to 120MM, the lever and handle socket get stuck. At this time, the handle should not be pushed forcefully to avoid damaging parts or causing accidents.

　　2. Do not throw or shake randomly. After use, keep the cylinder body reset to zero to avoid exposure to rust.

　　3. Before starting the track, an empty stroke check should be conducted to ensure that the track wheel can be raised to a high position. Otherwise, sufficient 10 # mechanical oil should be added.

　　To maintain the flexible and normal rotation of each hinge point, it is necessary to regularly add drip lubrication.

　　5. There is an insulation sleeve at the back of the handle to prevent electricity from passing between the two rails, which should be properly protected.

　　IIYQD-245 hydraulic lift, YQD147 hydraulic liftParameter introduction:

　　Model: Large lifting force (KN), large stroke of lifting wheel (mm), relief valve, unloading oil pressure (MPa), machine weight (kg)

　　YQD3 26

　　YQD-245 245 120 78.3 27

　　2、 YQD-245 hydraulic lift, YQD147 hydraulic liftMachine maintenance

　　1. In order to ensure the flexibility and reliability of the machine during each use, effective maintenance and periodic inspections must be carried out on the machine.

　　2. It is necessary to ensure that the sliding parts and exposed moving components of the machine are not corroded. After use, good engine oil must be applied. If the interval between uses is long, rust proof oil must be applied. Do not drop, knock, or damage the machine to ensure its accuracy.

　　3. Require periodic inspections of the moving parts and oil levels of the machine once a quarter.

　　4. When replacing or supplementing hydraulic oil, it is recommended to use hydraulic oil with a viscosity of 18-38 cS (at an oil temperature of 50 ℃) and a filtration accuracy of no more than 20 microns. When replenishing hydraulic oil, other impurities such as sand particles must not be mixed in. And pay attention to exhaust the pump body every time oil is injected.

　　5. When maintenance is required, clean the oil circuit and main components with gasoline or diesel, and be careful not to damage the components.

　　Our factory produces and sells various specifications of turnouts and railway industrial and mining accessoriesYQD-245 hydraulic lift, YQD147 hydraulic lift, etcRailway industrial and mining machinery and equipment, etc. Hongye Yuantu, Xingbang Lishi, survive with quality, develop with reputation, Hongyi Mining is dedicated to serving you!

AfterSalesService :

• Hydraulic lifting device