DZG-31 Electric Rail Drilling Machine Durable Hongyi Electric Rail Drilling Machine Wear resistant

Description :

　　DZG-31Durable Hongyi Electric Rail Drilling Machine Wear resistant

　　Electric Rail Drilling Machine Electric Rail Drilling Machine Electric Rail Drilling Machine Price DZG-31 Electric Rail Drilling Machine Electric Rail Drilling Machine Manufacturer Electric Rail Drilling Machine Model Electric Rail Drilling Machine

　　To conduct oneself in life, one must have a passionate heart, and to be impartial and diligent, one should have no ulterior motives.

　　1、 DZG-31 Electric Rail Drilling MachineFeatures: It saves drill bits. This machine uses high count Fried Dough Twists drill bits, which are durable and wear-resistant. When drilling, use a water bottle to supply water. When the drilling resistance is high, slow down the drilling speed to prevent motor overload.

　　2、 DZG-31 Electric Rail Drilling MachineTechnical Specifications

　　1. Motor: voltage 380v/power 1.1kw

　　two DZG-31Electric rail drilling machineSuitable for various types of steel rails ranging from 43-75kg/m

　　3. Working speed: 240n/min; 4. Installation time: 20-30 seconds Unloading time: 15-20 seconds

　　five DZG-31Electric rail drilling machineDrilling range: Φ 3.2- Φ 36mm

　　6. Drilling time is less than 1.5 minutes; 7. The travel distance shall not be less than 105mm

　　8. Hole diameter deviation: ± 0.5mm; 9. Dimensions: 700 × 420 × 360 (mm)

　　ten DZG-31Electric rail drilling machineWhole machine weight: 30kg

　　11. Drill shank taper: Mohs 3-4#

　　3、 Notes on DZG-31 Electric Rail Drilling Machine:

　　1. After drilling, it is necessary to wipe clean and keep the equipment clean. If the fuel is not used up for a long time, it should be placed in a ventilated, dry, and non corrosive gas warehouse.

　　2. Regularly check whether there are water droplets flowing out of the main shaft. If there are water droplets flowing out, replace the sealing ring at the main shaft.

　　3. After the drill bit wears out, drilling cannot be carried out again and the drill bit must be replaced.

　　4. When refueling, the engine must be stopped first and kept away from sources of ignition. After refueling, any remaining gasoline on the surface of the equipment should be wiped clean. Recommend using unleaded gasoline with an octane rating of 90 # or higher.

　　5. Do not let the equipment get wet. If it gets wet, dry the gasoline engine and all parts of the equipment, and place them in a ventilated and dry place.

　　Our factory specializes in producing and selling various specifications of turnouts and railway industrial and mining accessoriesDZG-31 Electric Rail Drilling MachineWaiting for railway industrial and mining machinery and equipment. Hongye Yuantu, Xingbang Lishi, survive with quality, develop with reputation, Hongyi Mining is dedicated to serving you!

AfterSalesService :

• Electric rail drilling machine