24kg 30kg electric switch manufacturer Hongyi produces mining switch pneumatic switch

Description :

　　24kg30kgHongyi, an electric switch manufacturer, produces mining switches and pneumatic switches

　　Electric switch, electric hydraulic switch, mining electric switch, 24kg electric switch, 30kg electric switch, electric switch manufacturer, horizontal switch, vertical switch, foot operated switch, manual switch, spring switch, pneumatic switch

　　Dignity is the glorious ideology of the elites who have experienced and created miracles in life.

　　1、 24kg 30kgElectric switch, mining switchApplicable steel rails include: 15-30kg

　　2、 24kg 30kgElectric switch, mining switchParameters:

　　1. Applicable turnout opening ≤ 120mm

　　2. Applicable switch conversion resistance ≤ 1960N (200KG)

　　3. The large linear displacement of the pull rod is 209mm

　　4. The electric switch is suitable for steel rails weighing 15-30kg

　　3、 The horizontal switch is suitable for steel rails of 8kg, 12kg, 18kg, 22kg, 24kg, 30kg

　　The foot operated switch is suitable for steel rails of 8kg, 12kg, 18kg, 22kg, 24kg, 30kg, 38kg, 43kg, 50kg, and 60kg.

　　4、 Except for 24kg and 30kgElectric switch, mining switchIn addition, let me introduce the spring switch separately:

　　The SL-120 spring switch (referred to as the switch) is a device for manually switching turnouts.

　　2. It uses the tension of the spring to achieve the function of switching the turnout to the fixed reverse position and maintaining it in the fixed reverse position.

　　3. Suitable for switches in the event of "switch squeezing fault", once the switch is squeezed, it will not damage the equipment.

　　4. It will be able to lock the shaft into the locking hole on the base and add a lock head to lock the switch in the reverse position, which is beneficial for safe driving over the switch.

　　The power supply of the electric switch adopts the mining universal current 127V working voltage, and uses the ZM-15T explosion-proof mining coal drill as the power source

　　5、 24kg 30kgElectric switch, mining switchMaintenance and Care

　　1. During use, it should be ensured that all fasteners are complete, bolts are tightened, and the opening pin arm is opened at the specified angle to prevent detachment.

　　2. The wear and tear of each connecting pin in the hole should not exceed 1mm, and if the wear is too large, the connecting pin should be replaced in a timely manner.

　　3. It should be ensured that during the switch conversion process, all parts move smoothly, rotate flexibly, and there is no jamming phenomenon.

　　4. Oil should be regularly applied between each pin shaft and hole, and between the handle head and the slider surface to maintain good lubrication.

　　Our factory specializes in producing and selling various specifications of turnouts and railway industrial and mining accessories, weighing 24kg and 30kgElectric switch, mining switchWaiting for railway industrial and mining machinery and equipment. Hongye Yuantu, Xingbang Lishi, survive with quality, develop with reputation, Hongyi Mining is dedicated to serving you!

AfterSalesService :

• Electric switch