GVD300 belt tear sensor wins with quality GVD1200 mining tear sensor intrinsic safety affordable

Description :

　　GVD300Belt tear sensor wins with quality GVD1200 mining tear sensor intrinsic safety affordable

　　Belt tear sensor GVD300 tear sensor GVD1200 tear sensor mining tear sensor

　　GVD300Belt tear sensor wins with qualityEspecially in the current stage of transition between the old and new systems, this advantage is even more necessary,GVD300 Belt Tear SensorThe structural principle is simple, but not everyone can optimize it completely. Hongyi TechnologyGVD300 belt tear sensor wins with quality GVD1200 mining tear sensor affordable sharingPlease let me know your needs, and I will recommend something suitable for you.

　　1GVD300 Belt Tear SensorTechnical Specifications:

　　1. Action performance: When a material of ≥ 300g/cm2 falls onto the sensitive surface of the sensor, the two output terminals should be connected.

　　2. Dimensions: 1200mm X 300mm X 315mm;

　　3. Quality: 10kg

　　4. Explosion proof mark: ExibI

　　5. Execution standard: Q/HWT93-2007

　　6. Contact capacity 12V/0.3A;

　　7. Contact resistance ≤ 0.20 Ω, ≤ 0.50 Ω after vibration and impact;

　　GVD1200Mining tear sensorExplosion proof type: mining intrinsic safety type

　　IIGVD300 Belt Tear SensorInstallation and debugging:

　　Fix the sensor on the brackets on both sides below the belt conveyor with mounting brackets, place the pressure-sensitive detector under the upper belt of the belt conveyor, open the sensor junction box, and connect SL (tear signal) and 0 (power ground) to the corresponding wiring terminals inside the KHP143-Z mining belt conveyor protection device host with cables.

　　Apply a pressure of ≥ 300g/cm2 on the surface of the pressure-sensitive detector of the sensor, and the two terminals of the sensor should be connected. After the pressure is released, the two terminals of the sensor should be disconnected.

　　The GVD300 intrinsically safe tearing sensor for mining (hereinafter referred to as the sensor) is suitable for environments containing explosive gases (CH4) underground in coal mines, as well as workplaces such as open-pit coal mines and coal preparation plants. It is used as a tearing protection signal detection device for comprehensive protection and control of mining belt conveyors.

　　IIIGVD1200 Mining Tear SensorMain performance parameters:

　　Explosion proof type: mining intrinsic safety type, marked as ExibI.

　　2 specifications and types: pressure-sensitive sensor

　　3 output modes: passive type, switch quantity.

　　4. Dimensions: 1200mm × 300mm × 30mm, Weight: 5kg

　　5 contact capacity: 12V/0.2A.

　　Contact resistance of 6-point contact ≤ 0.1 Ω, ≤ 0.2 Ω after vibration and impact.

　　The area of the pressure-sensitive tear sensor with 7 action values is 3000cm2. When 1200g of material falls into the 100cm2 area, the sensor will output 0V action.

　　8. Allowable error range for action values

　　The action error of the pressure-sensitive tear sensor is ± 10%, and the two output terminals should be connected with a resistance of less than 0.2 Ω

　　The output signal is a switch quantity

　　The real economy is the foundation of the economy,GVD300 Belt Tear SensorIt is the foundation of our belt conveyor comprehensive production enterprise, and we particularly need to create market space and support a large number of competitive enterprisesGVD300 Belt Tear SensorOccupying the market is an important support for the stability of enterprises.GVD1200 Mining Tear SensorI have everything you need, including pictures and prices. If you need anything, feel free to come to me. Hongyi Xiaozhang is always willing to help you solve the problem.

AfterSalesService :

• Tear sensor