LJH100 * 200 * 150 coal mining machine cable clamp installation speed fast H-type mining cable clamp

Description :

　　LJH100*two hundred*one hundred and fiftyFast installation speed of cable clamp for coal mining machine H-type mining cable clamp

　　Tai'an Hongyi is a mining equipment companyLJH100*two hundred*one hundred and fiftyCoal mining machine cable clampA research and manufacturing enterprise, the company has been focusing on the field of mining equipment for many years and has a strong technical team with strong research and development capabilities, H-type mining cable clampIt is an enterprise with strong equipment research and development capabilities and high reputation in the industry.

　　1LJH100*two hundred*one hundred and fiftyCoal mining machine cable clampMain structure: The cable clamp is composed of an O-shaped clamp plate, a cross plate, and a connecting pin shaft, which are made up of a carbon steel skeleton wrapped in polymer plastic.

　　IILJH100*two hundred*one hundred and fiftyCoal mining machine cable clampWorking principle: This product is suspended and installed on the towing cable frame of the coal mining machine, and moves together with the coal mining machine. The main function is to protect the cables and water pipes used in underground coal mining machines, in order to prevent cable and water pipe breakage and wear.

　　IIILJH100*two hundred*one hundred and fiftyCoal mining machine cable clampHow to install and use:

　　(1). First, insert the T-shaped plugs of the horizontal connecting plate into the T-shaped slots of the left and right clamping plates, so that the semi-circular positioning holes of the T-shaped plugs are concentric with the positioning pin holes of the clamping plates. Insert the positioning pins into the positioning pin holes to form a cable clamp slot

　　(2). Align the front and rear holes of the multi section cable tray, insert the connecting pin shaft from the inside out into the holes, install the split pin, and connect them into a section of cable tray. The final length can be determined according to the needs of the coal mining face.

　　(3). Place the cable into the clamp groove and connect it with a transverse plate as shown in the diagram to form a closed cable clamp, thus forming a complete cable clamp that meets the requirements of the coal mining machine.

　　4LJH100*two hundred*one hundred and fiftyCoal mining machine cable clampPrecautions for cable clamps:

　　When transporting cable clamps for mining coal mining machines, attention should be paid to the protection of the connecting parts.

　　2. The product should be stored in an indoor warehouse at a temperature of -15+40, avoiding contact with open flames.

　　3. During installation, make sure to insert the T-shaped plugs of the transverse connecting plate into the T-shaped slots of the left and right clamping plates respectively, and then use a glue hammer to knock the transverse connecting plate into place; Make the semi-circular positioning hole of the T-shaped plug concentric with the positioning pin hole of the clamp plate; Insert the positioning pin into the positioning pin hole and tap it into place with a rubber hammer.

　　The towed type produced by our companyLJH100*two hundred*one hundred and fiftyCoal mining machine cable clampUsing polymer modified composite materials, it has high strength, corrosion resistance, acid and alkali resistance, impact resistance, and good toughness. This cable clamp can provide protection for the cables and water pipes of the coal mining machine. The product specifications and models are complete, and can be continuously updated and improved according to the actual use of users. H-type mining cable clampTo ensure optimal discharge of cables and water pipes

AfterSalesService :

• Coal mining machine cable clamp