LJU100 * 180 * 140 coal mining machine cable clamp facilitates installation of U-shaped cable clamp

Description :

　　LJU100 * 180 * 140 coal mining machine cable clamp facilitates installation of U-shaped cable clamp

　　Customer satisfaction is our pursuit. We adhere to the service philosophy of "integrity, pragmatism, harmony, and win-win",LJU100 * 180 * 140 coal mining machine cable clampThrough pre-sales, in sales, and after-sales services, we enable users to personally experience our enthusiasm and sincerity, extending quality control from the production and manufacturing system to the service guarantee system,U-shaped cable clamp

　　Improved service quality has been achieved.

　　1LJU100 * 180 * 140 coal mining machine cable clampInstallation and use:

　　1. First, insert the T-shaped plugs of the horizontal connecting plate into the T-shaped slots of the left and right clamping plates, so that the semi-circular positioning holes of the T-shaped plugs are concentric with the positioning pin holes of the clamping plates. Insert the positioning pins into the positioning pin holes to form a cable clamp slot

　　2. Align the front and rear holes of the multi section cable tray, insert the connecting pin shaft from the inside out into the holes, install the split pin, and connect them into a section of cable tray. The final length can be determined according to the needs of the coal mining face.

　　3. Place the cable into the clamp groove and connect it with a transverse plate as shown in the diagram to form a closed cable clamp, thus forming a complete cable clamp that meets the requirements of the coal mining machine.

　　IILJU100 * 180 * 140 coal mining machine cable clampFeatures:

　　The cable clamp used for coal mining machines is lightweight, small in size, compact in structure, easy and fast to install, simple to maintain and repair, and has a long service life. It also has high tensile strength and impact resistance. Its advantage is that the inner lining steel skeleton carries drag force, protecting cables or water pipes from external forces. Nylon 66 is added with flame retardant, anti-static and other additives, which have flame retardant and anti-static effects. Adjacent cable clamps are easy to connect and can be extended as needed according to the working face of the coal mining machine. They protect cables or water pipes from reliable operation during towing, prevent breakage or damage, improve production efficiency, and reduce maintenance costs.

　　IIILJU100 * 180 * 140 coal mining machine cable clamppurpose

　　This product can be widely used in the towing and protection of power cables and inlet pipes of drum coal mining machines.

　　There are four types of cable clamps for mining, including LJU type, LJC type, LJO type, and LJH type, with a total of 18 specifications.

　　1. Appearance

　　The surface of the cable clamp should be smooth and even, and the surface covered with non-metallic materials should not expose the steel plate. After the cable clamps are connected in series, they should rotate flexibly and bend freely, and the bending angle should meet the requirements of the technical drawings.

　　2. Basic dimensions

　　The geometric dimensions of cable clamps shall comply with the provisions of Table 1 and the processing drawings. The aperture tolerance is H13 (GB/T 1800.4-1999), the limit deviation of hole spacing is GB/T 1804-f level (GB/T 1804-1992), the dimensional tolerances of H and A are level (GB/T 14486-2008), and the remaining dimensional tolerances shall be manufactured according to the unmarked dimensional tolerance MT5 level (GB/T 14486-2008) (see Figures 1-4).

　　3. Tensile strength

　　When the cable clamp is tested according to 7.4 of MT/T117-2007, its tensile strength should reach the working load in Table 2 and be maintained for 2 minutes. After unloading inspection, there should be no residual deformation, cracking, or detachment.

　　4. Tensile strength

　　When the cable clamp is tested according to 7.5 of MT/T117-2007, its tensile strength should not be less than the requirements in Table 2.

　　5. Impact resistance

　　When the cable clamp is tested according to 7.6 of MT/T117-2007, it should be able to withstand the impact energy specified in Table 2, and the cable clamp should not break after withstanding the impact.

　　6. Bending angle

　　The bending angle and ultimate deviation of adjacent cable clamps shall comply with the provisions of Table 3 or as agreed upon by both the supplier and demander.

　　Adhere to customized design, tailor-made, for everyLJU100 * 180 * 140 coal mining machine cable clampSpecially designed to ensure that everything provided to customers is suitableU-shaped cable clamp

　　Solution; We not only provide customers with the products and services they need, but also focus on the on-site application of products and customer experience.

AfterSalesService :

• Coal mining machine cable clamp