MQT130/2.9 Pneumatic Anchor Drilling Machine Principle Simple Mining Pneumatic Anchor Drilling Machine Easy to Operate
Category:
mechanical equipment/Fishery machinery and equipment/Mining drilling rig
Model:
MQT130/2.9
Brand:
Hongyi
Retail Price
1,850.00USD
重量
kg
- Product Description
-
Description :
MQT130/2.9Pneumatic anchor drilling rigThe principle is simple, and the mining pneumatic anchor drilling rig is easy to operate
Produced by our factoryMQT130/2.9Pneumatic anchor drilling rigIt is an anchor drilling rig that operates using air pressure and is an important equipment for coal mine tunnel excavation,Mining pneumatic anchor drilling rigIt has outstanding advantages in improving support effectiveness, reducing costs, accelerating tunnel completion speed, reducing auxiliary transportation volume, reducing labor intensity, and improving tunnel section utilization.
oneMQT130/2.9Pneumatic anchor drilling rigIntroduction of
The MQT-130/2.0 pneumatic anchor rod drilling rig is mainly used for coal mine rock hardness ≤ f10 in coal tunnels, rock tunnels, anchor rod support drilling, and can mix and install resin anchor rods and anchor cables. For anchor rods with damping nuts, the MQT-130/2.0 pneumatic anchor rod drilling rig can directly tighten the nuts during mixing to achieve one-time completion of anchor rod mixing and installation, and meet the requirements of initial anchor pre tightening force.
II MQT130/2.9Pneumatic anchor drilling rigCharacteristics of
1. Mostly made of engineering plastic materials, lightweight and easy to operate.
2. The MQT-130/2.0 pneumatic anchor drilling rig is powered by a large-sized motor, which has a higher power to weight ratio and a longer service life.
3. Parameter matching is more reasonable, and the drilling rig achieves high output power near the optimal drilling speed.
4. The propulsion part adopts a new type of fiberglass cylinder, which is safe, explosion-proof, lightweight and flexible.
5. The new type of water valve using patented technology can adapt to the high surface static pressure water in coal mines.
IIIMQT130/2.9Pneumatic anchor drilling rigparameters
Working pressure Mpa 0.4-0.63
Rated air pressure Mpa 0.5
Rated speed r-min 206
Rated torque N.m 130
Stall torque N.m 220
No load speed r-min ≥ 560
Gas consumption m3 min 4.5
High thrust KN 8
Flushing water pressure Mpa 0.6-1.2
Produced by our factoryMQT130/2.9Pneumatic anchor drilling rigAll raw materials are selected with low prices, good quality, and excellent service to cover the whole countryMining pneumatic anchor drilling rigDistributors supply in large quantities. Welcome to call for consultation.
AfterSalesService :
Key words:- Pneumatic anchor drilling rig
More Products
