LJO 125 * 160 * 150 coal mining machine cable clamp with complete specifications, polyethylene nylon cable clamp

Description :

　　LJO 125*one hundred and sixty*Cable clamp for 150 coal mining machineComplete specifications of polyethylene nylon cable clamps

　　Our company's main products areLJO 125*one hundred and sixty*Cable clamp for 150 coal mining machineThe mining cable hook is made of polymer composite material, which has high strength, acid and alkali resistance, impact resistance, and good toughness. This material cable clamp can provide better protection for coal mining machine cables and water pipes. Other products of the company include mining cable hooks, mining pipeline hooks, and other products.Polyethylene nylon cable clampThe product specifications and models are complete, and can be continuously updated and improved according to the actual use of users, achieving the best effect through cable and water pipe discharge.

　　1LJO 125*one hundred and sixty*Cable clamp for 150 coal mining machineMain structure and working principle:

　　Main structure: The cable clamp is composed of an O-shaped clamp plate, a cross plate, and a connecting pin shaft, which are made up of a carbon steel skeleton wrapped in polymer plastic.

　　Working principle: This product is suspended and installed on the towing cable frame of the coal mining machine, and moves together with the coal mining machine. The main function is to protect the cables and water pipes used in underground coal mining machines, in order to prevent cable and water pipe breakage and wear.

　　IILJO 125*one hundred and sixty*Cable clamp for 150 coal mining machineInstallation and use:

　　(1). First, insert the T-shaped plugs of the horizontal connecting plate into the T-shaped slots of the left and right clamping plates, so that the semi-circular positioning holes of the T-shaped plugs are concentric with the positioning pin holes of the clamping plates. Insert the positioning pins into the positioning pin holes to form a cable clamp slot

　　(2). Align the front and rear holes of the multi section cable tray, insert the connecting pin shaft from the inside out into the holes, install the split pin, and connect them into a section of cable tray. The final length can be determined according to the needs of the coal mining face.

　　(3). Place the cable into the clamp groove and connect it with a transverse plate as shown in the diagram to form a closed cable clamp, thus forming a complete cable clamp that meets the requirements of the coal mining machine.

　　IIILJO 125*one hundred and sixty*Cable clamp for 150 coal mining machineNotes:

　　When transporting this product, attention should be paid to the protection of the connecting parts.

　　2. The product should be stored in an indoor warehouse at a temperature of -15+40, avoiding contact with open flames.

　　3. During installation, make sure to insert the T-shaped plugs of the transverse connecting plate into the T-shaped slots of the left and right clamping plates respectively, and then use a glue hammer to knock the transverse connecting plate into place; Make the semi-circular positioning hole of the T-shaped plug concentric with the positioning pin hole of the clamp plate; Insert the positioning pin into the positioning pin hole and tap it into place with a rubber hammer.

　　Polyethylene nylon cable clampOur products are all made from raw materials that do not deform over time. The products are injection molded with high-density polyethylene (HDPE) in one go; It has the effects of heat resistance, antifreeze, and anti-corrosion. It can withstand high temperatures up to 120 degrees Celsius and low temperatures up to minus 20-30 degrees Celsius.

　　For many years, we have mainly provided supporting services for coal mines. In order to ensure the quality and price of our products, the company implements a strategic policy that integrates mold development, production, and sales. among whichLJH100*one hundred and eighty*Cable clamp for 110 coal mining machineThis is a new product developed by the company in recent years, which has improved wear resistance and impact resistance by more than 50% compared to the old product. Received unanimous praise from a large number of customers. Welcome all users to visit and discuss cooperation with our company.

AfterSalesService :

• Cable clamp for coal mining machine