LJO100 * 135 * 100 cable clamp for coal mining machine, cable clamp for coal mine

Description :

　　LJO100*135*100Cable clamps for coal mining machines, cable clamps for coal mines, cable clamp manufacturers

　　LJO100*135*100Cable clamp for coal mining machineIt's Hongyi. The development of the enterprise cannot do without you, me, and him,LJO100 * 135 * 100 cable clamp for coal mining machineCan be used underground in coal mines,Coal mine cable clampDare to compete and win the competition.

　　LJO100*135*100Cable clamp for coal mining machineThe main structure and working principle of:

　　Main structure: The cable clamp is composed of an O-shaped clamp plate, a cross plate, and a connecting pin shaft, which are made up of a carbon steel skeleton wrapped in polymer plastic.

　　Working principle: This product is suspended and installed on the towing cable frame of the coal mining machine, and moves together with the coal mining machine. The main function is to protect the cables and water pipes used in underground coal mining machines, in order to prevent cable and water pipe breakage and wear.

　　LJO100*135*100Cable clamp for coal mining machineFeatures:

　　The cable clamp used for coal mining machines is lightweight, small in size, compact in structure, easy and fast to install, simple to maintain and repair, and has a long service life. It also has high tensile strength and impact resistance. Its advantage is that the inner lining steel skeleton carries drag force, protecting cables or water pipes from external forces. Nylon 66 is added with flame retardant, anti-static and other additives, which have flame retardant and anti-static effects. Adjacent cable clamps are easy to connect and can be extended as needed according to the working face of the coal mining machine. They protect cables or water pipes from reliable operation during towing, prevent breakage or damage, improve production efficiency, and reduce maintenance costs.

　　LJO100*135*100Cable clamp for coal mining machineTechnical features and model description

　　Form U, H, O, C

　　Total width B 55 00 185

　　Inner cavity width A 100 110 120 60 72 82

　　Height H 80 100 120 20 150 160

　　Inner cavity height C 50 70 90 115 70 115 75 105 120

　　Selling hole ZhongxinL 100 100 125 125

　　Pin hole diameter D 15~17

　　LJO100*135*100Cable clamp for coal mining machinestructure

　　The cable clamp is a composite structure composed of four injection molded plates with embedded steel frames. The assembly method is to rotate and fix the embedded metal rods, and the connection method is to use special bolts. The injection molding material is wear-resistant engineering plastic, and the embedded metal frame is made of stamped steel plates and cold drawn round steel. The connection size, as well as the diameter of the connecting bolts and pin holes, have been standardized, and the series can be interchangeable and modified into various specifications.

　　LJO100*135*100Cable clamp for coal mining machineHow to install and use:

　　1. First, insert the T-shaped plugs of the horizontal connecting plate into the T-shaped slots of the left and right clamping plates, so that the semi-circular positioning holes of the T-shaped plugs are concentric with the positioning pin holes of the clamping plates. Insert the positioning pins into the positioning pin holes to form a cable clamp slot

　　2. Align the front and rear holes of the multi section cable tray, insert the connecting pin shaft from the inside out into the holes, install the split pin, and connect them into a section of cable tray. The final length can be determined according to the needs of the coal mining face.

　　3. Place the cable into the clamp groove and connect it with a transverse plate as shown in the diagram to form a closed cable clamp, thus forming a complete cable clamp that meets the requirements of the coal mining machine.

AfterSalesService :

• Cable clamp for coal mining machine