LJC125 * 190 * 170 mining cable clamp, impact resistant and unbreakable C-type cable clamp for coal mining machines

Description :

　　LJC125*190*170C-type cable clamp for mining cable clamps with impact resistance and non rupture for coal mining machines

　　LJC125*190*170Mining cable clampAfter testing the use of coal mines, metallurgy and other systems in Shandong, Shanxi, Shaanxi and other places, everyone has generally received good feedback, especiallyCable clamp for coal mining machineLight weight, small size, compact structure, easy and fast installation, simple maintenance and repair, highly praised by users.

　　1、 LJC125 * 190 * 170 mining cable clampTensile strength:

　　Cable clamp for coal mining machineWhen tested according to the provisions of 7.5 in MT/T117-2007, the tensile strength should not be less than the provisions in Table 2.

　　IILJC125*190*170Mining cable clampImpact resistance:

　　Cable clamp for coal mining machineWhen tested according to 7.6 of MT/T117-2007, the cable clamp should be able to withstand the impact energy specified in Table 2, and the cable clamp should not break after withstanding the impact.

　　IIILJC125*190*170Mining cable clampBending angle:

　　Adjacent two itemsCable clamp for coal mining machineThe bending angle and its ultimate deviation shall comply with the provisions of Table 3 or as agreed upon by both the supplier and demander.

　　HongyiLJC125*190*170Mining cable clampUsing polymer modified composite materials, it has high strength, corrosion resistance, acid and alkali resistance, impact resistance, and good toughness.

　　4、 Cable clamp for coal mining machineThe product specifications and models are complete, mainly divided into four types: LJU, LJC, LJO, and LJH.

　　5LJC125*190*170Mining cable clampUsage principle:

　　adjacentCable clamp for coal mining machineAfter connecting with pins or bolts, a protective channel (cable clamp chain) is formed. The cable clamp chain can flexibly rotate a certain angle with the movement of the coal mining machine working face. The inner lining steel strip skeleton is directly used for the connection of adjacent cable clamps, bearing the drag force of the coal mining machine working face movement, protecting the cable or water pipe from the drag force, and ensuring the continuous and normal operation of the coal mining machine.

　　VILJC125*190*170Mining cable clampInstallation method:

　　1. LJO type cable clamps are connected one by one with matching bolts according to the required length of the coal mining face. The connecting bolts should be tightened with special tools to avoid abnormalities.

　　2. The cable clamps of LJU, LJH, and LJC coal mining machines are connected one by one with matching pin shafts according to the required length of the coal mining face. After the pin shafts are installed, they should be positioned with split rings or split pins to prevent them from falling off and causing abnormalities.

　　Produced by our factoryLJC125*190*170Mining cable clampThe essence of our strategy is not a framework, but rather our dedication to itCable clamp for coal mining machineThe frequent use of mechanized operations in coal mines requires higher requirements for supporting accessories, which should be safe and lightweight. HongyiCable clampIt will be a good choice for you.

AfterSalesService :

• Mining cable clamp