Hongyi XFD Single Cell Flotation Machine Installation and Maintenance Mining Laboratory Flotation Machine in Stock

Description :

　　XFDSingle cell flotation machine, laboratory flotation machine, mining flotation machine

　　Customer requestXFD Single Cell Flotation MachineIt's our service standard,XFD Single Cell Flotation MachineValue contracts and ensure quality. It's difficult to win a customer and easy to lose one, so we takeLaboratory flotation machineGood job, long-term cooperation.

　　One XFD Single Cell Flotation MachineFeature Introduction

　　XFDSingle cell flotation machineSuitable for the selection of non-ferrous and black metals, and can also be used for the selection of non-metallic materials such as coal fluorite and talc. The single cell flotation machine is driven by the triangle generation drive of the motor to rotate the impeller, which produces centrifugal action to form a negative pressure. On the one hand, sufficient air is sucked in to mix with the pulp, on the other hand, the pulp is stirred to mix with drugs, and at the same time, the foam is refined, so that the minerals are bonded to the foam and floated to the pulp surface to form a mineralized foam. Adjust the height of the ram and control the liquid level so that the useful foam can be scraped out by the scraper

　　XFDSingle cell flotation machineMainly used for selecting non-ferrous metals such as copper, zinc, lead, nickel, gold, etc., it can also be used for rough selection and selection of ferrous and non-metallic materials.

　　After the coal slurry and reagents are fully mixed, they are fed into the bottom of the single tank flotation machine. After the impeller rotates, negative pressure is formed in the wheel cavity, causing the slurry at the bottom of the tank and in the tank to enter the mixing zone through the lower and upper suction ports of the impeller, respectively. This also allows air to enter the mixing zone along the air guide sleeve, where the slurry, air, and reagents mix. Under the centrifugal force of the impeller, the mixed slurry enters the mineralized area, the air forms bubbles and is crushed, fully contacts with the coal particles, forming mineralized bubbles. Under the action of the stator and turbulence plate, it is evenly distributed on the section of the tank body, and moves upward into the separation area. The foam layer is formed by the enrichment, and discharged by the foam scraping mechanism, forming the cleaned coal foam. The unmineralized coal particles on the bottom of the trough will be mixed, mineralized, and separated again through the circulation holes and upper suction ports. The part of the slurry that is not sucked in by the impeller at the bottom of the tank enters the bottom of the second chamber through the intermediate ore box buried in the slurry. After completing the entire process of the chamber, it enters the third chamber. The single chamber flotation machine repeats this process, and the slurry enters the tailings tank after passing through the first chamber to discharge the tailings.

　　II XFD Single Cell Flotation MachineTechnical Specifications:

　　III XFD Single Cell Flotation Machineworking principle

　　The single cell flotation machine (mine single cell flotation machine) is driven by the motor V-belt, which drives the impeller to rotate, generating centrifugal action to form negative pressure. On the one hand, it absorbs sufficient air to mix with the pulp, on the other hand, it stirs and mixes the pulp, and at the same time, it refines the foam, so that the minerals bond to the foam, float to the pulp surface, and then form a mineralized foam. Adjust the height of the ram and control the liquid level so that the useful foam can be scraped out by the scraper.

　　4 XFD Single Cell Flotation MachineInstallation and maintenance

　　The maintenance and upkeep of machines is an important and regular task that should be closely coordinated with operations and repairs. There should be dedicated personnel on duty to conduct inspections

　　XFDSingle cell flotation machineMachine maintenance

　　1. The bearings bear all the load of the machine, so good lubrication has a great relationship with the bearing life. It directly affects the service life and operation rate of the machine. Therefore, it is required to inject clean lubricating oil and have good sealing. The main oil injection points of this machine are 1. rotating bearings 2. roller bearings 3. all gears 4. movable bearings and sliding surfaces

　　2. Regularly inspect newly installed wheel rims for looseness

　　3. Pay attention to whether the various parts of the machine are working properly

　　4. Pay attention to checking the degree of wear of easily worn parts and replace worn parts at any time

　　5. The base plane of the movable device should be free of dust and other substances to prevent the movable bearings from moving on the base frame when the machine encounters materials that cannot be broken, resulting in serious accidents

　　6. If the bearing oil temperature rises, the vehicle should be stopped immediately to check the cause and eliminate it.

　　7. If there is any impact sound during the operation of the rotating gear, it should be stopped immediately for inspection and eliminated

　　XFDSingle cell flotation machineInstallation and test drive

　　1. The equipment should be installed on a horizontal concrete foundation and fixed with anchor bolts [4].

　　2. During installation, attention should be paid to the verticality between the main body and the horizontal.

　　3. After installation, check whether the bolts in each part are loose and whether the main engine compartment door is tightened. If so, please tighten it.

　　4. Configure power lines and control switches according to the power of the equipment.

　　5. After inspection, conduct a no-load test run. If the test run is normal, production can proceed.

AfterSalesService :

• XFD Single Cell Flotation Machine