Laboratory use XFD1L single cell flotation machine Hongyi brand 1-liter flotation machine for beneficiation plant use

Description :

　　XFD1LSingle cell flotation machine, 1-liter flotation machine, mining flotation machine

　　We doXFD1L Single Cell Flotation MachineQuality is produced, not inspected. We make itXFD1L Single Cell Flotation MachineUnderstand the customer's needs, make mistakes, complaints, and grievances,1-liter flotation machineGood quality, more affordable economy

　　XFD1LSingle cell flotation machineProduct usage scope:

　　XFD1LSingle cell flotation machineMainly used for flotation of small amounts of ore samples in industrial experiments such as coal-fired power, electricity, mining, geology, chemistry, metallurgy, building materials, and chemical engineering. This product is produced by an enterprise designated by the local mining department and follows industry standards

　　The single cell flotation machine is driven by the triangle generation drive of the motor to rotate the impeller, which produces centrifugal action to form a negative pressure. On the one hand, sufficient air is sucked in to mix with the pulp, on the other hand, the pulp is stirred to mix with drugs, and at the same time, the foam is refined, so that the minerals are bonded to the foam and floated to the pulp surface to form a mineralized foam. Adjust the height of the ram and control the liquid level so that the useful foam can be scraped out by the scraper.

　　XFD1LSingle cell flotation machineworking principle

　　The single cell flotation machine is driven by the triangle generation drive of the motor to rotate the impeller, which produces centrifugal action to form a negative pressure. On the one hand, sufficient air is sucked in to mix with the pulp, on the other hand, the pulp is stirred to mix with drugs, and at the same time, the foam is refined, so that the minerals are bonded to the foam and floated to the pulp surface to form a mineralized foam. Adjust the height of the ram and control the liquid level so that the useful foam can be scraped out by the scraper

　　After thorough mixing of coal slurry and reagents, they are fed into the bottom of the * chamber of the single cell flotation machine. After the impeller rotates, negative pressure is formed in the wheel cavity, causing the slurry at the bottom of the tank and in the tank to enter the mixing zone through the lower and upper suction ports of the impeller, respectively. This also allows air to enter the mixing zone along the air guide sleeve, where the slurry, air, and reagents mix. Under the centrifugal force of the impeller, the mixed slurry enters the mineralized area, the air forms bubbles and is crushed, fully contacts with the coal particles, forming mineralized bubbles. Under the action of the stator and turbulence plate, it is evenly distributed on the section of the tank body, and moves upward into the separation area. The foam layer is formed by the enrichment, and discharged by the foam scraping mechanism, forming the cleaned coal foam. The unmineralized coal particles on the bottom of the trough will be mixed, mineralized, and separated again through the circulation holes and upper suction ports. The part of the slurry that is not sucked in by the impeller at the bottom of the tank enters the bottom of the second chamber through the intermediate ore box buried in the slurry, completes the entire process of the first chamber, and then enters the third chamber. The single tank flotation machine repeats this process, and the slurry passes through the second chamber before entering the tailings tank to discharge the final tailings.

　　XFD1LSingle cell flotation machineMain technical parameters:

　　Model XFD0.5 XFD0.75 XFD1 XFD1.5 XFD3

　　Slot capacity 0.5 L 0.75L 1L 1.5L 3L

　　Impeller diameter: Φ 45mm, Φ 55mm, Φ 60mm, Φ 70mm

　　Impeller speed 2590/2340/2130 2100/1900/1700 1910/1750/1590 1890/1708/1544

　　Scraper speed 15/30 7.9/19.1

　　Feeding particle size 0.05-0.2mm

　　Spindle motor DYS16-8 2800 (RPM) 75W JW6324 1410 (RPM) 250W

　　Dimensions 502 × 263 × 628mm 570 × 263 × 668mm 560 × 310 × 590mm

　　Weight 30kg 33kg 50kg

　　XFD1LSingle cell flotation machineProduct advantages

　　Compared to other experimental flotation equipment, single cell flotation machines have more advantages:

　　1. Reasonable circulation of slurry can minimize the sedimentation of coarse sand to the greatest extent possible. Equipped with an automatic control device for the slurry surface, easy to adjust.

　　2. The impeller of a single cell flotation machine has upper and lower blades that tilt backwards. The upper blades of the mining single cell flotation machine generate upward circulation of slurry, while the lower blades generate downward circulation of slurry.

　　3. Single cell flotation machine has a large suction capacity and low power consumption.

　　4XFD1L Single Cell Flotation MachineEach tank has triple functions of suction, slurry suction, and flotation, forming its own flotation circuit without the need for any auxiliary equipment. It is horizontally configured to facilitate process changes.

AfterSalesService :

• XFD1L Single Cell Flotation Machine