LJH100 * 180 * 140 coal mining machine cable clamp composed of nylon cable clamp for coal mines

Description :

　　LJH100*180*140Cable clamps for coal mining machines, nylon cable clamps for coal mines, cable clamp models

　　Quality is the life of an enterprise,LJH100 * 180 * 140 cable clamp for coal mining machineWe have achieved this, we have done itLJH100 * 180 * 140 cable clamp for coal mining machineSurvive by quality and develop by quality. madeNylon cable clamps for coal mineshighly capable

　　LJH100*180*140Cable clamp for coal mining machineIntroduction:

　　The cable clamp for coal mining machine is made by injection molding nylon 66 with flame retardant and anti-static agent (nylon 66+flame retardant+anti-static agent) and steel frame. It is connected by pins or bolts to form a protective channel for cables or water pipes according to the needs of the coal mining machine working face.

　　LJH100*180*140Cable clamp for coal mining machineModel representation:

　　LJH H-type cable clamp

　　100 pin hole spacing

　　180 overall width

　　140 height

　　LJH100*180*140Cable clamp for coal mining machinePurpose and scope of use

　　The cable clamp of the coal mining machine can be widely used to form the towing and protection cable and inlet pipe towing device of the drum type coal mining machine in coal mines.

　　LJH100*180*140Cable clamp for coal mining machineworking principle

　　Adjacent cable clamps are connected by pins or bolts to form a protective channel (cable clamp chain). The cable clamp chain can flexibly rotate a certain angle with the movement of the coal mining machine working face. The inner lining steel strip skeleton is directly used for the connection of adjacent cable clamps, bearing the drag force of the coal mining machine working face movement

　　LJH100*180*140Cable clamp for coal mining machineform:

　　The cable clamp consists of a clamp body, a spring, a pin shaft, and a switch pin. The H-shaped inner side of the clamp body has a guide groove on each side, and there are four corresponding square holes on both ends of the guide groove. One side of the clamp body has two parallel connecting plates, and the other side has a connecting plate. Each connecting plate has a circular hole with the same aperture. Its clamping body is made of steel plate as the skeleton, surface coated with nylon material, and has an asymmetric H-shaped structure with Zhongxin traction. The method of fixing cables and water pipes with cable clamps is achieved by using spring locking fixation. This utility model has a wide range of applications and can be used in both general and comprehensive mining.

　　LJH100*180*140Cable clamp for coal mining machineFeatures:

　　The cable clamp used for coal mining machines is lightweight, small in size, compact in structure, easy and fast to install, simple to maintain and repair, and has a long service life. It also has high tensile strength and impact resistance. Its advantage is that the inner lining steel skeleton carries drag force, protecting cables or water pipes from external forces. Nylon 66 is added with flame retardant, anti-static and other additives, which have flame retardant and anti-static effects. Adjacent cable clamps are easy to connect and can be extended as needed according to the working face of the coal mining machine. They protect cables or water pipes from reliable operation during towing, prevent breakage or damage, improve production efficiency, and reduce maintenance costs.

AfterSalesService :

• Cable clamp for coal mining machine