XFD0.75L laboratory flotation machine Hongyi direct sales 0.75L single cell flotation machine for mining use

Description :

　　XFD0.75LLaboratory flotation machine, 0.75-liter single cell flotation machine, mining flotation machine

　　XFD0.75LLaboratory flotation machineEntering the realm of quality, bringingXFD0.75L laboratory flotation machineBusiness opportunities and product quality are the wings of expansion, so0.75 liter single cell flotation machinePlease rest assured to purchase, from production to shipment in one line. Welcome to inquire by phone.

　　XFD0.75LLaboratory flotation machineStructure Introduction

　　1. Machine base; 2. Tray; 3. Tank body; 4. Mixing section; 5. Scraper section; 6. Main shaft section; 7. Shield; 8. Motor; 9. Flow meter; 10. Control switch; 11. Scraper switch

　　All components are fastened to the body, and the spindle rotates clockwise, generating three different speeds through different belt grooves; The rotation of the scraper is driven by the scraper motor through the pulley, and the position of the scraper can be adjusted by the butterfly nut.

　　XFD0.75LLaboratory flotation machineStructural features:

　　XFD0.75LLaboratory flotation machineLarge suction capacity and low power consumption. The single cell flotation machine has three functions of suction, slurry suction, and flotation in each cell, forming its own flotation circuit without any auxiliary equipment. It is horizontally configured and easy to change the process. Reasonable circulation of slurry can reduce sedimentation of coarse sand. Equipped with an automatic control device for the slurry surface, easy to adjust. The impeller of a single cell flotation machine has upper and lower blades that tilt backwards. The upper blades of the mining single cell flotation machine generate upward circulation of slurry, while the lower blades generate downward circulation of slurry.

　　XFD0.75LLaboratory flotation machineWorking Principle:

　　XFD0.75LLaboratory flotation machine(Mining single cell flotation machine) is driven by the motor triangle belt, which drives the impeller to rotate, generating centrifugal action to form negative pressure. On the one hand, sufficient air is inhaled to mix with the pulp, on the other hand, the pulp is stirred to mix with drugs, and at the same time, the foam is refined, so that the minerals are bonded to the foam and floated to the pulp surface to form a mineralized foam. Adjust the height of the ram and control the liquid level so that the useful foam can be scraped out by the scraper.

　　XFD0.75LTechnical specifications of laboratory flotation machine:

　　XFD0.5XFD0.75 XFD1 XFD1.5 XFD3 XFD8

　　Slot capacity L 0.5 0.75 1 1.5 3 8

　　Impeller diameter MM ф 45 55 60 70 100

　　Scraper speed revolutions per minute 15, 30 7.9.19.1 8.6.12.9.17.2

　　Mineral particle size MM -0.2

　　Motor W 2800 (RPM) 75W 1410 RPM 250W

　　Dimensions MM 502 × 263 × 268 570 × 263 × 668 560 × 310 × 590 380 × 505 × 970

　　Weight kg 30 33 50 72

　　XFD0.75LLaboratory flotation machineUsage and maintenance:

　　XFD0.75LLaboratory flotation machine(Mining single cell flotation machine) Before starting up, check the bolts of each part. Before stopping and starting up, rotate the wheel manually to prevent sediment deposition from increasing the motor load. When working, carefully adjust the gate height to keep the liquid level stable, and scrape the mineralized foam on the pulp liquid level into the launder at any time. The impeller and stator should maintain a certain distance, and attention should be paid to replacement when worn. The bearings inside the pump body should be maintained every three months.

　　The maintenance and upkeep of machines is an important and regular task, which should be closely coordinated with operations and repairs, and should have dedicated personnel

　　Conduct on duty inspections.

　　1. Pay attention to whether the various parts of the machine are working properly.

　　2. Regularly inspect newly installed wheel rims for looseness.

　　3. The bearings bear all the load of the machine, so good lubrication has a great relationship with the bearing life. It directly affects the service life and operation rate of the machine. Therefore, it is required to inject clean lubricating oil and have good sealing. The main oil injection points of this machine are the rotating bearings, roller bearings, all gears, movable bearings, and sliding surfaces.

　　4XFD0.75L laboratory flotation machineIf the bearing oil temperature rises, the vehicle should be stopped immediately to check the cause and eliminate it.

　　5. If there is any impact sound during the operation of the rotating gear, it should be stopped immediately for inspection and eliminated.

　　6. Pay attention to checking the degree of wear of easily worn parts and replace worn parts at any time.

　　7. The base plane of the movable device should be free of dust and other substances to prevent the movable bearings from moving on the base frame when the machine encounters unbreakable materials, which may cause serious accidents.

AfterSalesService :

• Laboratory flotation machine