FBQ water sealed explosion-proof device is simple and easy to use. Hongyi FBQ600 water sealed explosion-proof device is in stock

Description :

　　FBQWater sealed explosion-proof device, FBQ600 water sealed explosion-proof device, water sealed explosion-proof device structure

　　FBQWater sealed explosion-proof deviceMotivate us to produce, success lies on the other side, achievementFBQWater sealed explosion-proof devicePerformance, the following is an introductionFBQ600Water sealed explosion-proof deviceparameter

　　FBQWater sealed explosion-proof devicepurpose

　　The FBQ series water sealed explosion-proof device is installed on the pipelines of the suction and exhaust sides of the gas pump, and is protected by the water seal at the bottom of the explosion-proof device to ensure the safety of the well, pumping station equipment, and users

　　FBQWater sealed explosion-proof deviceTechnical Specifications

　　Model FBQ-3

　　Explosion proof cylinder height (mm) 1300

　　Explosion proof device height (mm) 1575

　　Explosion proof cylinder diameter (mm) 1050

　　Explosion proof cylinder mouth diameter (mm) 400

　　Import and export diameter (mm) 300

　　Explosion proof cylinder width (mm) 1330

　　Mass (kg) 540

　　FBQWater sealed explosion-proof deviceTechnical features:

　　1. Simple structure, economical and practical;

　　2. Once an explosion or combustion occurs inside the gas pipe, the explosion wave and flame are isolated by the water seal, and at the same time, the explosion-proof cover rubber plate is opened or broken, releasing the explosive energy.

　　3. The water sealed explosion-proof device is used to extract or discharge gas through the water cover during normal drainage. The automatic water addition device can keep the water seal of the water sealed explosion-proof device constant at the preset position;

　　4. The water sealed explosion-proof device consists of an intake pipe, an exhaust pipe, an explosion-proof cover rubber plate, a round iron cylinder, a water level gauge, an automatic water adding device, etc

　　FBQWater sealed explosion-proof deviceWorking Principle:

　　The water sealed explosion-proof device is used to extract or discharge gas through the water cover during normal drainage. The automatic water addition device can keep the water seal of the water sealed explosion-proof device constant at the preset position; Once an explosion or combustion occurs inside the gas pipe, the explosion wave and flame are isolated by the water seal, and at the same time, the explosion-proof cover rubber plate is opened or broken, releasing the explosive energy. When gas is pumped out, the gas enters the water through the inlet bend, then separates from the water and is discharged through the outlet bend. The inlet and outlet pipelines are isolated by a water seal; When an explosion occurs at one end, a continuous explosion cannot be formed under the isolation of the water seal. At this time, the rubber plate of the pressure relief device is flushed open to release pressure, protecting the safety of the well, pumping station equipment, and users.

　　FBQWater sealed explosion-proof deviceUsage environment:

　　1. Operating environment temperature: 0 ＜ T ≤ 100 ℃;

　　2. Pressure range: positive pressure P ≥ 10Kpa, negative pressure P ≤ -10Kpa;

　　3. Under the positive pressure test conditions of the venting rubber plate, the blasting pressure is 0.12Mpa;

　　4. Can be designed and manufactured according to user requirements.

AfterSalesService :

• FBQ water sealed explosion-proof device