XFD0.5L single cell flotation machine with large suction capacity, Hongyi 0.5-liter laboratory flotation machine

Description :

　　XFD0.5LSingle cell flotation machine, laboratory flotation machine, small flotation machine

　　Require quality,XFD0.5L Single Cell Flotation MachineHaving achieved this,XFD0.5L Single Cell Flotation MachineSatisfying customers is our hope.Laboratory flotation machineAfter sales service satisfies you.

　　XFD0.5LSingle cell flotation machineMainly used for flotation of small amounts of ore samples in industrial experiments such as coal-fired power, electricity, mining, geology, chemistry, metallurgy, building materials, and chemical engineering. This product is produced by an enterprise designated by the local mining department and follows industry standards. If the customer needs a multi slot flotation machine or a hanging slot flotation machine. Please contact us.

　　XFD0.5LSingle cell flotation machineCharacteristics of

　　Single cell flotation machine has a large suction capacity and low power consumption. The single cell flotation machine has three functions of suction, slurry suction, and flotation in each cell, forming its own flotation circuit without any auxiliary equipment. It is horizontally configured and easy to change the process. Reasonable circulation of slurry can reduce sedimentation of coarse sand. Equipped with an automatic control device for the slurry surface, easy to adjust. The impeller of a single cell flotation machine has upper and lower blades that tilt backwards. The upper blades of the mining single cell flotation machine generate upward circulation of slurry, while the lower blades generate downward circulation of slurry.

　　XFD0.5LTechnical parameters of single cell flotation machine:

　　Brand Hongyi Model XFD-0.5L

　　Also known as flotation machine, it is used in mines

　　Effective volume 0.5 (m3) Processing capacity 0.5 (m3/h)

　　Motor model 0, motor power 0.09 (kw)

　　Motor speed 2800 (r/min) feeding particle size -0.2

　　Scraper speed 15/30, impeller diameter 45

　　Impeller speed 2130-2590

　　XFD0.5LSingle cell flotation machineStructure Introduction

　　1. Machine base; 2. Tray; 3. Tank body; 4. Mixing section; 5. Scraper section; 6. Main shaft section; 7. Shield; 8. Motor; 9. Flow meter; 10. Control switch; 11. Scraper switch

　　All components are fastened to the body, and the spindle rotates clockwise, generating three different speeds through different belt grooves; The rotation of the scraper is driven by the scraper motor through the pulley, and the position of the scraper can be adjusted by the butterfly nut.

　　XFD0.5LSingle cell flotation machineoperating sequence

　　1. Connect the power supply according to regulations;

　　2. Try turning on the machine to check the direction of rotation of the spindle. It must rotate clockwise. If not, switch the power phase sequence to make the motor rotate clockwise before starting to work.

　　First, mix the ore sample with water and pour it into the tank. Start the motor, the main shaft rotates, and the impeller in the tank begins to mix. Then open the cold door for inflation. After adding the required agent, foam can be formed. Turn on the scraper motor switch to rotate the scraper. Then the foam can be scraped out of the notch, and the material box is placed on the workbench. After the scraped out foam is processed, the desired mineral can be obtained.

　　XFD0.5LSingle cell flotation machineOperation and maintenance

　　1. After the device is powered on normally, please read the user manual carefully for specific parameter changes and inverter wiring.

　　2. When replacing the impeller stator, first unscrew the impeller, then loosen the fixing screws between the stator and the lower body, and replace it with a new impeller and stator.

　　3. When transporting the flotation machine, the focus should be on the body rather than any components to avoid damage.

　　4. The working temperature of the flotation tank is 15-50 ℃.

　　5. Before each work, it is necessary to check whether there is anything stuck in the groove, whether the impeller has fallen off, the matching of the belt, the connection of the screws, etc., before starting work.

　　6. Lubricating oil should be added to each rotating joint, and lubricating grease should be changed at least once every three months at the bearing. (Lubricating grease requires a melting point of ≥ 100 ℃)

　　7. After each use, the tank body and impeller should be cleaned and wiped dry; Keep the machine durable, tidy and beautiful.

AfterSalesService :

• XFD0.5L Single Cell Flotation Machine