Factory direct sales of 22KG mining track clamp plate Hongyi track track clamp plate in stock

Description :

　　22KGMining track clamp, track clamp, fishplate

　　22KGMining road clampSurvival through quality, development through reputation, we do22KG mining roadway clampOur strategy is to seek quality, and our policy is to prioritize reputation.Rail track clampQuality comes from, value comes from belief.

　　22KGMining road clampAlso known as track joint clamp, commonly known as fishtail plate. It is a type of connecting fastener used for connecting rails between rails. The production materials for general road clamps are Q235, QT400-18, etc. There are also some special sections that require the use of special materials to manufacture road clamp products. For example, insulated track clamps are made by extruding high-strength alkali free glass fibers impregnated with epoxy resin through high-temperature molding molds.

　　22KGMining road clampSpecifications:

　　Light rail clamp models: 15KG rail clamp, 22KG rail clamp, 24KG rail clamp, 30KG rail clamp,

　　Heavy rail clamp models: 38KG rail clamp, 43KG rail clamp, 50KG rail clamp,

　　Crane rail clamp models: QU70 clamp, QU80 clamp, QU100 clamp, QU120 clamp

　　22KGMining road clampInstallation steps:

　　1. The contact part between the fishplate and the steel rail, as well as the bolts, should be coated with oil.

　　When installing bolts, the spring and flat washers should be installed first, with the opening facing downwards.

　　3. Install two bolts on each joint of the track clamp, that is, one bolt on each rail head first.

　　22KGMining road clampmaterial

　　Divided by material: Q235: Chemical composition (melting analysis) of laminated steel according to model: less than or equal to 15kg/m and greater than 15kg/m

　　It should comply with the provisions of Q235-A (or Class B steel 3) and Q255-A (or Class B steel 4) steel in GB 700 respectively.

　　Ductile iron: QT400-18

　　22KGMining road clampPrecautions for installation process:

　　1. Drivers are strictly prohibited from leaving their posts when parking or loading materials.

　　2. Attention should be paid to the model of the road clamp and the quality inspection should be in place.

　　3. All construction personnel should enter a safe location before driving in the inclined shaft.

　　4. All electrical equipment must be explosion-proof.

AfterSalesService :

• 22KG mining roadway clamp