MQTB-130/3.2 Pneumatic Anchor Drilling Machine Stable Operation MQTB-130/4.0 Leg Anchor Drilling Machine

Description :

　　MQTB-130/3.2Pneumatic assisted anchor drilling rig operates stably MQTB-130/4.0 pneumatic leg assisted anchor drilling rig

　　Users are concerned aboutMQTB-130/3.2Pneumatic assisted anchor drilling rig operates stablySatisfaction is the pursuit of enterprises,HongyiMQTB-130/4.0Pneumatic leg type anchor drilling rigQuality is an entity that can be obtained, measured, and bring benefits.

　　1MQTB-130/3.2 Pneumatic Anchor Rod Drilling MachineProduct Introduction:

　　MQTB-130/4.0Pneumatic leg type anchor drilling rigIt is the main tool for drilling anchor cables and anchor rods underground in coal mines. In addition to its drilling function, it can also install anchor cables or anchor rods (such as mixing resin and tightening nuts). It is powered by compressed air and uses water to flush the borehole without dust. Its significant feature is the continuous generation of vibration during the rotary drilling process, which solves the problem of pure rotary anchor rod drilling machine being unable to drill hard rocks. This machine has good drilling performance for hard rocks above f10. It is a portable drilling rig with small size, light weight, easy operation, and convenient maintenance.

　　IIMQTB-130/3.2 Pneumatic Anchor Rod Drilling MachineProduct Features:

　　MQTB-130/4.0Pneumatic leg type anchor drilling rigSmall size, light weight, easy operation, and convenient maintenance. Gear type pneumatic motor, stable operation, high reliability. The new fiberglass air leg design is safe, explosion-proof, and has a longer service life.

　　IIIMQTB-130/4.0 Pneumatic Leg type Anchor Rod Drilling MachineProduct Parameters:

　　Air consumption 3.8 m/min

　　Noise ≤ 95 dB (A)

　　The overall height of the machine is 3000 Mm

　　Small height of the whole machine 1120 Mm

　　Machine weight 50 Kg

　　Drill tail connection dimensions 19, 23, 13 × 13, 18 × 18 Mm

　　Flushing water pressure 0.6-1.2 Mpa

　　Working pressure 0.5Mpa

　　Rated speed 230 r/min

　　Rated torque 130N. m

　　Shock frequency 69Hz

　　Amplitude 2Mm

　　Output power 4.0kW

　　No load speed 570 R/min

　　Stall torque 205 N.m

　　4、 MQTB-130/3.2 Pneumatic Anchor Rod Drilling MachineProduct Parameters:

　　Stall torque N.m 210

　　No load speed r/min ≥ 560

　　Gas consumption m3/min 4.4

　　Thrust KN 8

　　Flushing water pressure Mpa 0.6-1.2

　　Noise dB (A) ≤ 95

　　Whole machine weight Kg 55

　　Working pressure Mpa 0.4-0.63

　　Rated air pressure Mpa 0.5

　　Rated speed r/min 220

　　Rated torque N.m 110

　　Rated power kw 3.2

　　MQTB-130/3.2Pneumatic anchor drilling rigCompared to pneumatic handheld drilling rigs, it has greater torque and power, allowing it to drill holes on harder working surfaces. By using support legs to bear the weight of the machine, it can overcome reverse torque and push forward,MQTB-130/4.0 Pneumatic Leg type Anchor Rod Drilling MachineMore suitable for drilling, mixing, and installation in high positions and shoulder sockets of tunnels.

AfterSalesService :

• Pneumatic anchor drilling rig