LJO125 * 210 * 160/110/190 cable clamp injection molding mining coal mining machine cable clamp

Description :

　　LJO125*210*160/110/190Cable clamp injection molding The cable clamp of the mining coal mining machine does not deform

　　Produced by Tai'an HongyiLJO125*210*160/110/190Cable clampDriven by innovation and seeking development through quality. Dare to be the first and pursue better is our aim, and we will provide moreMining coal mining machine cable clampWe provide you with both products and services simultaneouslyCable clampMore reasonable prices.

　　1LJO125*210*160/110/190Cable clampMain structure: The cable clamp is composed of an O-shaped clamp plate, a cross plate, and a connecting pin shaft, which are made up of a carbon steel skeleton wrapped in polymer plastic.

　　IILJO125*210*160/110/190Cable clampWorking principle: This product is suspended and installed on the towing cable frame of the coal mining machine, and moves together with the coal mining machine. The main function is to protect the cables and water pipes used in underground coal mining machines, in order to prevent cable and water pipe breakage and wear.

　　IIILJO125*210*160/110/190Cable clampHow to install and use:

　　(1). First, insert the T-shaped plugs of the horizontal connecting plate into the T-shaped slots of the left and right clamping plates, so that the semi-circular positioning holes of the T-shaped plugs are concentric with the positioning pin holes of the clamping plates. Insert the positioning pins into the positioning pin holes to form a cable clamp slot

　　(2). Align the front and rear holes of the multi section cable tray, insert the connecting pin shaft from the inside out into the holes, install the split pin, and connect them into a section of cable tray. The final length can be determined according to the needs of the coal mining face.

　　(3). Place the cable into the clamp groove and connect it with a transverse plate as shown in the diagram to form a closed cable clamp, thus forming a complete cable clamp that meets the requirements of the coal mining machine.

　　4LJO125*210*160/110/190Cable clampNotes:

　　1．Mining coal mining machine cable clampDuring transportation, attention should be paid to the protection of the connecting parts.

　　2. The product should be stored in an indoor warehouse at a temperature of -15+40, avoiding contact with open flames.

　　3. During installation, make sure to insert the T-shaped plugs of the transverse connecting plate into the T-shaped slots of the left and right clamping plates respectively, and then use a glue hammer to knock the transverse connecting plate into place; Make the semi-circular positioning hole of the T-shaped plug concentric with the positioning pin hole of the clamp plate; Insert the positioning pin into the positioning pin hole and tap it into place with a rubber hammer.

　　OCable clamp for type coal mining machinePartial model selection:

　　LJO125*180*152 LJO125*180*130 LJO125*180*125 LJO125*180*140

　　LJO125*210*160 LJO100*210*110 LJO125*210*190 LJO125*143*125

　　LJO100*235*125 LJO125*186*125 LJO125*180*145 LJO125*193*170

　　LJO125*140*100 LJO125*130*100 LJO125*200*152 LJO100*200*100

　　LJO125*186*163 LJO125*186*152 LJO125*190*125 LJO125*190*100

　　LJO100*190*100 LJO125*175*148 LJO125*175*100 LJO125*195*125

　　LJO125*195*130 LJO125*195*145 LJO100*150*135 LJO125*150*100

　　LJO125*160*100 LJO125*160*152

　　UCable clamp for type coal mining machinePartial model selection:

　　LJU100*145*100 LJU100*150*100 LJU100*150*105 LJU100*155*100

　　LJU100*170*125 LJU100*180*140 LJU100*135*100

　　CCable clamp for type coal mining machinePartial model selection:

　　LJC125*180*130 LJC125*185*150 LJC125*190*130 LJC125*190*170

　　LJC125*195*145 LJC125*196*160 LJC125*170*148

　　HCable clamp for type coal mining machinePartial model selection:

　　LJH100*180*100 LJH100*180*140 LJH100*180*150 LJH100*182*110

　　LJH100*182*110 LJH100*200*118 LJH100*200*135 LJH100*210*100

　　LJO125*210*160/110/190Cable clampThe product does not deform over time and is injection molded with high-density polyethylene (HDPE) in one go;Mining coal mining machine cable clampIt has the effects of heat resistance, antifreeze, and anti-corrosion. It can withstand high temperatures up to 120 degrees Celsius and low temperatures up to minus 20-30 degrees Celsius.

AfterSalesService :

• Cable clamp