Hongyi FRZ50 Pneumatic Vibrator with Large Amplitude 2020 Mining Pneumatic Vibrator Rod

Description :

　　FRZ50Pneumatic vibrator, mining pneumatic vibration rod, pneumatic vibrator

　　provideFRZ-50 Pneumatic VibratorProduct service, establishFRZ-50 Pneumatic VibratorProduct quality awareness. Customer requestMining pneumatic vibration rodAbove the standard, to satisfy you.

　　FRZ-50Pneumatic vibratorProduct Features:

　　Mining pneumatic vibration rodUsing compressed air as the gas source and blade type air motor as the power source, it has the advantages of large amplitude, high frequency, light weight, reasonable structure, and easy maintenance and use. Suitable for underground coal mines with gas and coal dust, as well as for "edge lining" cement compaction projects, it is safe and reliable to use and can be selected as a vibrator for well construction.

　　FRZ-50Pneumatic vibratorIt is a pneumatic oscillator powered by compressed air and a blade type air motor, with a soft shaft transmission. It has the advantages of large amplitude, high frequency, light weight, reasonable structure, safe operation, and convenient maintenance and application. Unrestricted by power supply, humidity, and other conditions, it is widely used in the construction of construction projects with compressed air sources. For various dry, hard, and plastic concrete compaction operations, the pneumatic oscillator is particularly suitable for coal mine shafts containing gas and coal dust, as well as for cement compaction projects at the "edge" of the mine. It is safe and reliable to use

　　FRZ-50Pneumatic vibratorparameter

　　Vibration rod diameter

　　45 (mm)

　　Vibrator diameter

　　50 millimeters

　　FRZ-50Pneumatic vibratortotal length

　　6000 millimeters

　　power

　　Bladed pneumatic motor

　　rated speed

　　3000 revolutions per minute

　　Pneumatic vibrator with air pressure

　　4-5 kilograms per square centimeter

　　air consumption

　　1.5 cubic meters per minute of air intake

　　Mining pneumatic vibration rodInner diameter of intake duct

　　25 millimeters

　　Vibration frequency (in air)

　　3000 times per minute

　　Lower amplitude (in air)

　　&>10mm

　　Total weight

　　About 27.5 kilograms

　　Soft shaft diameter

　　13mm

　　hose diameter

　　36mm

　　Hose length

　　3961mm

　　FRZ-50Pneumatic vibratorMotor part: composed of rotor, cylinder, upper and lower end covers, bearings, etc.

　　1. This pneumatic motor adopts a pre intake side blowing type, where compressed air enters the cylinder through the main air duct, pushes the blades, and drives the rotor to operate and work.

　　2. There are 8 ￠ 6 inlet holes on the main air duct of the cylinder, and 32 ￠ 5 exhaust holes are staggered to ensure uniform blade wear.

　　3Mining pneumatic vibration rodTo increase the blade width and prolong its service life, four radial equal slots on the rotor are milled into R75 circular arc slots with blades inside.

　　4Mining pneumatic vibration rodInstall one 203 and one 305 single row radial ball bearing respectively in the upper and lower end covers of the pneumatic motor to withstand axial torque. There is a J-shaped skeleton sealing ring at the lower end cover to prevent compressed air from flowing down inside the wind motor, effectively ensuring the reliability, stability, and service life of the wind motor transmission.

AfterSalesService :

• FRZ50 Pneumatic Vibrator