Technical parameters of 2ZBQ30/30 mining pneumatic double liquid injection pump, maintenance of small mining double cylinder injection pump

Description :

　　2ZBQ30/30Mining pneumatic dual liquid grouting pump, mining dual cylinder grouting pump, mining pneumatic grouting pump

　　2ZBQ30/30Mining pneumatic dual liquid injection pumpMotivate us to produce, success lies on the other side, achievement2ZBQ30/30 Mining Pneumatic Double Liquid Grouting PumpPerformance, the following is an introductionMining double cylinder grouting pumpparameter

　　2ZBQ30/30Mining pneumatic dual liquid injection pumpAdvantages:

　　1. The style is innovative.

　　2. Parameters can be adjusted according to different customer needs. Meet the special requirements of different pressures, flow rates, multi-component slurry mixing ratios, and different media.

　　3. Good safety, it can be safely used in flammable, explosive, temperature and humidity changing places.

　　four Mining double cylinder grouting pumpFully functional, it can be filled with either single component slurry or two-component slurry. It can be injected with either chemical slurry or mud; Each cylinder works synchronously, the mixing ratio can be adjusted, and the slurry is evenly mixed; And it can be used as an emulsion pump, hydraulic pump, etc. for other occasions.

　　2ZBQ30/30Mining pneumatic dual liquid injection pumpparameter

　　Large slurry discharge flow rate L/min 30

　　Large discharge pressure map 30

　　Weight kg 160

　　Dimensions m: 1.3 × 0.6 × 1.2

　　Mining double cylinder grouting pumpCompressed air consumption 3.0m3

　　Adjustable slurry ratio: 1:1 to 1:0.5

　　Working mode: automatic variable for pressure limiting and holding

　　2ZBQ30/30Mining pneumatic dual liquid injection pumpMaintenance and repair:

　　During operation, oil should be dripped onto the moving parts of the reversing mechanism.

　　When parked for a long time, butter should be applied to all moving parts, suction and discharge valve ports, and valve balls.

　　3. The pump should use lubricating oil and other types of oil are not allowed to replace it.

　　4. Regularly check whether the U-shaped clips of each high-pressure hose are loose to prevent the hose from falling off and injuring people.

　　5. Check every 3 months.

　　six Mining double cylinder grouting pumpThe pressure of the main gas system shall not exceed 0.8MPa.

　　7. After grouting is completed, pump and discharge clean water to flush the slurry tank and overflow area until clean water flows out of the slurry pipe.

　　8. Attention: 1) When replacing safety label accessories, use accessories that have obtained mining product safety labels and are within their validity period. 2) The pressure regulating valve of the pneumatic system cannot exceed 0.6Mpa. 3) The slurry system is prohibited from working under leakage conditions, and any leaked slurry should be promptly cleaned and buried.

　　2ZBQ30/30Mining pneumatic dual liquid injection pumpFeatures: The pneumatic grouting pump has a compact structure, small volume, and is easy to move. It can be directly placed on a relatively flat ground; The inlet and outlet of the pump are equipped with quick connectors, which are convenient and fast to connect the suction and discharge pipes, and have reliable sealing; The power of the pump is compressed air, which can change the flow rate of compressed air for speed regulation; The pneumatic motor drives three piston pumps, and the piston area ratio between the motor and the three piston pumps is 28:1, which determines the ratio of intake pressure to output pressure to be 1:28, and can deliver two types of liquids at high pressure in a proportional manner.

　　Style of high-pressure grouting pump

　　2ZBQ30/30Mining pneumatic dual liquid injection pumpWidely used for grouting and water blocking in tunnels and mining faces; Grouting and plugging water leakage in rock tunnels and concrete well walls; Tunnel cracks, fractured rock masses, and reinforcement of dispersed rocks; Anchor grouting; Backfilling grouting and grouting to prevent surface subsidence, prevent landslides, and correct building deviations. The dual liquid high-pressure grouting machine used during the construction process is shown in the following figure, and the construction method is shown in step three. The solidification state of the water cured AB nano grouting fluid. 1Mining double cylinder grouting pumpIf the prepared slurry is not used up on the same day, it can be stored for a few days and reused. It should be kept in a cool place, away from sunlight and high temperatures, and stored at 40 ℃; 2. Wear protective equipment such as gloves, masks, and goggles during construction, and do not directly contact the materials to prevent the slurry from entering the eyes or coming into contact with the skin.

AfterSalesService :

• Mining pneumatic dual liquid injection pump