Hongyi NC/B-90 steam heater power NC/B-125 steam heater

Description :

　　NC/B-90Steam heater, NC/B-125 steam heater, steam heater manufacturer

　　NC/B-90Steam heaterStrive for excellence in every detail,NC/B-90 steam heaterFocus on reducing costs without compromising quality.NC/B-125 steam heaterSuitable for coal mines, easy and convenient to operate.

　　NC/B-90Steam heaterIt is an HVAC terminal device that uses various heat media (hot water, steam, electricity) as the medium to quickly cool and heat indoor air or outdoor fresh air, enhancing air circulation. It is currently a relatively advanced equipment in China, which can be widely used in production workshops of industrial and mining enterprises and large public buildings. It can be installed on the side or on the ceiling as needed. We can design and produce warm air blowers according to customer needs.

　　NC/B-90Steam heaterWorking Principle:

　　NC/B-125Steam heaterIt mainly consists of an air heater and a fan. The heat medium (which can be steam, water, or electricity) passes through the air heater, and the wind blown out by the fan takes away the heat emitted by the heater, thereby increasing the indoor air temperature. The air heater is composed of spiral finned tubes. The number and layers of heat dissipation pipes can be determined according to the actual needs of the user and the size of the heater. The working pressure of the heater is below 0.8 MPa.

　　NC/B-90Steam heaterStructural features:

　　NC/B-125Steam heaterIt mainly consists of a heat exchanger, an axial flow fan, a casing, and louvers. Heat exchangers can adopt various forms of heat exchange tubes depending on the type of heat medium introduced. Axial flow fans are equipped with low-noise, high-efficiency blades, large air volume, and uniform and stable wind speed.

　　NC/B-90Steam heaterInstallation, use, and maintenance

　　When installing this machine, first check if the machine is in good condition.

　　Valves should be installed on the inlet and outlet pipes of the heat exchanger, and the diameter of the inlet and outlet main pipes should be larger than that of the heat exchanger.

　　This machine should be installed indoors at temperatures above 15 ℃.

　　four NC/B-125Steam heaterBefore testing the machine, the fan blades must be turned on to check for any scraping or collision between the fan blades and the machine. When starting up, attention should be paid to the direction of motor rotation, which should be the same as the direction indicated by the arrow label.

　　5. The motor bearings should be cleaned once a year and lubricated with oil.

　　The temperature of hot water used in the heat exchanger should not exceed 130 ℃, and the pH value should not exceed 8 to avoid reducing its service life.

AfterSalesService :

• Steam heater