BQG150 Mining Pneumatic Diaphragm Pump for Cleaning Sludge Industrial Pneumatic Diaphragm Pump

Description :

　　BQG150Mining pneumatic diaphragm pump, industrial pneumatic diaphragm pump, explosion-proof pneumatic diaphragm pump

　　Quality is the life of an enterprise,BQG150/0.2Mining pneumatic diaphragm pumpWe have achieved this, we have done itBQG150/0.2Mining pneumatic diaphragm pumpSurvive by quality and develop by quality. madeIndustrial pneumatic diaphragm pumpAdvantages of strong sewage discharge capacity, large flow rate, high head, etc

　　BQG150/0.2Mining pneumatic diaphragm pumpFeatures

　　Industrial pneumatic diaphragm pumpBy driving the valve core back and forth with airflow, the compressed air alternately enters the left and right air chambers, causing the diaphragm to move back and forth and creating a pressure difference in the working chamber, achieving the purpose of water absorption and drainage. Small size, light weight, no need for foundation, can be used as a mobile pump, no lubrication required, the main valve has no special requirements for the air source, and can start and operate by self suction.

　　BQG150/0.2Mining pneumatic diaphragm pumpModel meaning

　　B-mining pump Q-pneumatic G-diaphragm X - flow rate (liters/minute)/discharge pressure

　　BQG150/0.2Mining pneumatic diaphragm pumpWorking environment conditions

　　1. The compressed air used for power should have a pressure range of 0.2-0.7 Mpa;

　　2. The temperature of the conveying medium shall not exceed 40 ℃;

　　3. The pH of the conveying medium is within the range of 4-10;

　　4. The maximum diameter of solid particles should not exceed 6-9mm, and their volume concentration should not exceed 2%;

　　five Industrial pneumatic diaphragm pumpEnvironmental temperature: -20 ℃ to 50 ℃;

　　6. Environmental humidity: ≤ 95% (when the ambient temperature is+25 ℃);

　　7. Atmospheric pressure: 80kPa to 106kPa;

　　8. Suitable for hazardous areas with coal dust and methane explosive gases underground in coal mines, but without corrosive gases that damage insulation.

　　BQG150/0.2Mining pneumatic diaphragm pumpmodel

　　1.5-inch pneumatic diaphragm pump BQG100/0.4, BQG140/0.3, BQG150/0.2

　　2-inch pneumatic diaphragm pump BQG125/0.45, BQG200/0.4, BQG250/0.3, BQG350/0.2

　　3-inch pneumatic diaphragm pump BQG320/0.3, BQG450/0.2

　　BQG150/0.2Mining pneumatic diaphragm pumpComposition structure:

　　Industrial pneumatic diaphragm pumpIt is composed of: outlet manifold, pump cover, pump body, inlet manifold, diaphragm, ball, ball seat, outlet pipe, slide valve, piston, inlet pipe, inlet joint, etc.

　　BQG150/0.2Mining pneumatic diaphragm pumpworking principle

　　Industrial pneumatic diaphragm pumpBy utilizing the pressure difference in the gas chamber to alternately generate suction liquid pressure and positive liquid pressure in the liquid chamber, controlling the valve opening and closing can ensure the forward flow of liquid. After ventilation, the pump starts running and continues to work to ensure that the required pressure remains constant. The pump will increase and maintain the delivery pipe pressure, and when the maximum delivery pipe pressure is reached (or the distribution valve is closed), it will stop working and resume pumping when needed.

　　BQG150/0.2Mining pneumatic diaphragm pumpPurpose:

　　Used for discharging sewage in the upper and lower grooves of coal mining faces, oil accumulation pits of pressure fans, and water accumulation pits in winch rooms.

　　1. Used for excavating and draining mixed water at the head (or head-on) of the mountain.

　　2. Clean the water tank and discharge the slurry.

　　3. Used for discharging mixed water in high gas mines and excavation tunnels.

　　4. Used for slurry transportation in petroleum, chemical, food, and pharmaceutical industries.

AfterSalesService :

• BQG150 Mining Pneumatic Diaphragm Pump