KCS-250D mining wet dust removal fan 18.5KW mining dust removal fan KCS250D extraction ventilation

Description :

　　KCS-250DMining wet dust removal fan 18.5KW mining dust removal fan KCS250D extraction ventilation dust removal

　　KCS-250DMining wet dust removal fanExpand the market with technology, establish an image with service,18.5KW mining wet dust removal fan extraction ventilation dust removalDo what you say, be effective, and increase efficiency through management,KCS-250D Mining Wet Dust Removal FanUsed as a dust removal equipment for underground tunneling machines, it can also be used for extraction ventilation and dust removal in tunneling tunnels.

　　1KCS-250D Mining Wet Dust Removal FanApplicable environment:

　　1) Relative humidity: ≤ 95% (at+25 ℃);

　　2) Environmental atmospheric pressure: 80kPa~106kPa;

　　3) Can be used in explosive gas environments containing methane and coal dust;

　　4) In an environment free from gases and vapors that damage metals and insulation.

　　5) Working temperature: 0 ℃~+40 ℃;

　　2、 KCS-250D Mining Wet Dust Removal FanDesign principle:

　　Processed and manufactured according to MT159-2005 "General Technical Conditions for Mining Dust Collectors" and Q/MAS 99-2013 "KCS-250D Mining Wet Dust Removal Fan Enterprise Standard". Driven by an explosion-proof mixed flow fan, the dusty gas is sucked into the dust remover through the air duct (pipe). Under the action of the dense water mist of the spray, the dust is wet and condensed. At the same time, a water film that intercepts the dust is formed on the filter screen to capture the dust. Under the continuous washing effect of water mist, the dust and mud slurry flows into the water tank and is discharged through the drainage valve. The partially penetrating water mist is separated under the action of eddies, and the purified gas is discharged into the tunnel to achieve the purpose of dust removal.

IIIKCS-250D Mining Wet Dust Removal FanParameter introduction:

　　1. Processing air volume (m3/min) 250

　　2. Rated power (kW) 18.5

　　3. Rated voltage (V) 380/660

　　4. Rated current (A) 39/22.5

　　5. Rated speed (r/min) 2930

　　6. Air leakage rate (%) ≤ 5

　　7. Static pressure efficiency (%) ≥ 55

　　8. Applicable water pressure (MPa) 0.2~1

　　9. Supporting motor model YBF2-160L-2

　　Our factory produces and sellsMining wet dust removal fanIt includes multiple power outputs and models ranging from 4KW to 55KW. Our factory values contracts, operates in a standardized manner, and ensuresKCS-250D Mining Wet Dust Removal FanQuality, reputation commitment,18.5KW mining wet dust removal fan extraction ventilation dust removalPursue good quality and show the essence of the enterprise Shandong Hongyi looks forward to your inquiries and cooperation!

AfterSalesService :

• Mining wet dust removal fan