ZBQ27 single liquid injection pump, a commonly used model in coal mines, ZBQ pneumatic injection pump, booster type

Description :

　　ZBQ27Single liquid injection pump, ZBQ pneumatic injection pump, mining pneumatic injection pump manufacturer

　　ZBQ27/1.5Single liquid injection pumpIt is a guarantee of reputation, reputation isZBQ27/1.5Single liquid injection pumpThe manifestation. strictly observeZBQPneumatic grouting pumpStandards, pioneering and enterprising new situation for enterprises

　　ZBQ27/1.5Single liquid injection pumpCharacteristics and Applications

　　ZBQ27/1.5Single liquid injection pump(referred to as grouting pump) is mainly used in the construction of mines, tunnels, water conservancy, subways, buildings, and bridges. It is used for grouting water blocking, filling gaps, grouting consolidation of fractured rock layers, and grouting of anchor cables; It is also used for repairing local defects such as frost heave in highway and railway roadbeds, as well as for soft foundation treatment; Eliminate underground hazards in flood control and rescue operations.

　　The grouting pump has a small volume, light weight, and reliable use. It can be safely used in places that are flammable, explosive, have large temperature and humidity changes.

　　ZBQ27/1.5Single liquid injection pumpBasic performance parameters of model designation method

　　2.1 Type: The grouting pump is a plunger reciprocating single liquid grouting pump.

　　2.2 Model: ZBQ-27/1.5

　　ZB: Type code: Coal mine plunger grouting pump

　　Q: Feature code: Power source type: Q-Pneumatic

　　27: Flow rate L/min

　　1.5: Pressure Mpa

　　ZBQ27/1.5Single liquid injection pumpWorking conditions:

　　1. Environmental temperature: 0 ℃~45 ℃;

　　2ZBQ27/1.5Single liquid injection pumpRelative humidity not exceeding 95% (at+25 ℃);

　　3. Coal mines underground with * * * and * * * gases;

　　4ZBQPneumatic grouting pumpConstruction site: Drilling and sealing holes underground in coal mines, filling the roof space of the working face, and quickly building sealed walls.

　　ZBQ27/1.5Single liquid injection pumpModel description and parameters:

　　Z: Grouting B: Pump Q: Pneumatic 27: Rated flow rate 27L/min 1.5: Rated working pressure 1.5Mpa

　　ZBQ27/1.5 (or QB152)

　　Working pressure: 0.4-0.63Mpa; Flow rate: 22-30L/min

　　Piston stroke 100mm, discharge pressure: 1.5MPA

　　Slurry output 27 L/min, mass 16kg

　　ZBQPneumatic grouting pumpGas consumption: 0.5 m3/min reciprocating times/min: ≤ 15 times/min

　　Ventilation pipe diameter: 3/4 "Size: 1100 * 207 * 330mm

　　ZBQ27/1.5Single liquid injection pumpSafety Warning

　　1. This pump is powered by compressed air, and when in use, the working pressure should not exceed 0.63Mpa; When shutting down, the intake valve should be reliably closed to prevent the pneumatic mechanism from automatically opening and causing injury or death accidents.

　　2ZBQ27/1.5Single liquid injection pumpHigh pressure rubber hoses are not provided at the factory and should be provided by the user during use.

　　Special attention: The compressed air hose connected to this machine should comply with the standards of the coal industry, and the connection to this machine should be firm and reliable to prevent accidents such as sudden detachment of the joint or sudden cracking of the hose, which may cause injury or death to personnel.

　　3. High pressure pumps are high noise equipment, and the harm of noise to human health should be taken seriously. Products with relatively low noise should be selected as much as possible.

　　4ZBQPneumatic grouting pumpDuring work, attention should be paid to observing the condition of the roof to prevent sudden partial collapse of the roof or falling of gravel, which may injure the operators.

　　5ZBQ27/1.5Single liquid injection pumpThe cylinder piston is made of light alloy (FHZL503A), and its material safety performance should comply with the standards of the coal industry. It should also have a qualified inspection certificate from a statutory inspection agency, and should not be replaced or used with accessories from other enterprises at will.

　　6. OperationZBQPneumatic grouting pumpThe pneumatic valve should be slowly opened and adjusted, and it is strictly prohibited to suddenly start the grouting pump to avoid accidents.

　　7. The cleaning medium for cleaning this pump underground must not use gasoline, kerosene, or other flammable or toxic cleaning materials to avoid fire accidents.

AfterSalesService :

• ZBQ27 single liquid injection pump