FQCNO4.0 Mining Pneumatic Fan FQC4.0 Pneumatic Fan Pneumatic Motor Axial Flow Ventilator

Description :

　　FQCNO4.0Mining Pneumatic Fan FQC4.0 Pneumatic Fan Pneumatic Motor Axial Flow Fan

　　Our customers' quality requirements are ourFQCNO4.0 coal mine pneumatic fanThe production standards,Mining pneumatic fan, air motor, axial flow ventilationGood results, integrity is a treasure, sincerity and good quality.FQCNO4.0 coal mine pneumatic fanThe pneumatic motor is driven by compressed air to drive the impeller to rotate. It can be used as an extraction type local ventilation fan in environments with high gas concentration underground in coal mines.

　　1、 Targeting both new and existing customers，Here is a brief explanationFQCNO4.0 coal mine pneumatic fanFault analysis and troubleshooting: fault characteristics, fault causes, fault identification and troubleshooting methods

　　1. There is a metal collision sound inside, and the blades wipe the casing. Replace the blades or casing

　　2. Metal objects entering and removing foreign objects

　　3. There is collision sound inside the pneumatic motor. If there is too much lubricating oil or fatigue wear of the bearings, reduce the lubricating oil or replace the motor gears. If the pressure or air volume is insufficient, the air duct may leak or the speed of the pneumatic motor may be insufficient. Check the air leakage situation or inspect the pneumatic motor.

　　5. Vibration increases, intermittent noise. Pneumatic fan operates under unstable conditions and checks the intake and exhaust conditions.

　　6. Pneumatic fan, pneumatic difficulty, pneumatic motor gear jamming. Add lubricating grease or replace the pneumatic motor

　　IIFQCNO4.0 coal mine pneumatic fanWorking conditions:

　　1. The supply air volume should be greater than the working air volume.

　　2. The height of the edge of the air inlet from the ground or top wall should not be less than 0.3m.

　　3. The service life shall not be less than 4 years, and the safe operation time before major repairs shall not be less than 1200 hours.

　　4. The foundation for installation should be firm, with no exposure to sunlight or rain around.

IIIFQCNO4.0Pneumatic fan for coal minesIntroduction to Performance Parameters and Indicators:

　　Model FQC № 4.0

　　Diameter 400 mm

　　Wind pressure 750 Pa

　　Length 450 mm

　　Gas supply pressure 0.45 MPa

　　Weight 41 Kg

　　Gas consumption 5.4 m3/min

　　Speed 3000 r/min

　　Airflow of 120 m3/min

　　The pneumatic fans produced and sold by our factory mainly include FQCPneumatic fan for coal minesThere are various models available, including FQ Pneumatic Axial Flow Fans, FQC № 2.8 Pneumatic Fans, FQC № 3.15 Pneumatic Fans, FQC № 4.0 Pneumatic Fans, FQC № 5.0 Pneumatic Fans, FQ № 3.55 Pneumatic Fans, FQ № 5.6 Pneumatic Fans, FQ № 2.5 Pneumatic Fans, FQ № 5.0 Pneumatic Fans, and more. There is always one that suits you,FQCNO4.0 coal mine pneumatic fanDesign is the source of quality, and quality is the guarantee of success,Mining pneumatic fan, air motor, axial flow ventilationConquer people's hearts with quality and make the market aware. Shandong Hongyi Mining is dedicated to serving you and looks forward to your inquiries!

AfterSalesService :

• FQCNO4.0 mining pneumatic fan