KCS-500D mining wet dust removal fan has a large air volume, KCS500D mining dust removal fan has a power of 30KW

Description :

　　KCS-500DMining wet dust removal fan with high air volume KCS500D mining dust removal fan power 30KW

　　KCS-500DMining wet dust removal fanQuality lies in conscience, conscience looks at people's hearts,30KW mine dedusting fan spray dedusting air volume is largeWithout quality, there is no tomorrow for the enterprise,KCS-500D Mining Wet Dust Removal FanStrict quality, excellent products, able to work in locations with high dust or gas concentrations, safe and reliable to use.

　　1KCS-500DMining wet dust removal fanComposition and Installation:

　　It is mainly composed of axial flow fan, dust removal fan box (including spray device, filter screen, air dust separation device), water quality filter and rack. It is often installed on the tail bearing section of the belt conveyor, and the rigid air duct is fixed on the transfer machine of the tunneling machine. The working mode is extraction type, and the suction port is fixed on the right side guard plate of the excavator rotary table. The installation position of the air duct should ensure that it does not affect normal operation, maintenance, and pedestrian safety.

　　2、 KCS-500D Mining Wet Dust Removal FanThe functions of the axial flow fan and the casing are as follows:

　　1. The wind power of the axial flow fan comes from the counter rotating extraction type axial flow fan used. The main function is to extract the dusty air from the front. This axial flow fan has a large air processing capacity and can work in locations with high dust or gas concentrations, making it safe and reliable to use.

　　2. The box contains spray device, filter screen, air dust separation device and other components. Used to filter out dust from dusty air and discharge clean air into the tunnel.

　　3、 KCS-500D Mining Wet Dust Removal FanThe functions of the water quality filter and the frame are as follows:

　　1. The water quality filter is used to filter the water supplied to the dedusting fan to prevent impurities in the water from blocking the spray device.

　　2. Install axial flow fans, enclosures, and filters on the rack. And it can run on the guide rail at the tail of the belt conveyor.

　　4KCS-500D Mining Wet Dust Removal FanThe functions of the air intake component and the traction component are as follows:

　　1. The air intake component consists of a negative pressure air duct, which is used to extract dusty air from the front.

　　2. When using the guide rail operation mode at the tail of the belt conveyor, the traction component is used to connect the frame and the transfer machine. To synchronize the forward or backward movement of the dust removal fan and the tunneling machine.

　　5KCS-500D Mining Wet Dust Removal FanMain technical performance parameters:

　　Fan model KCS-500D

　　Processing air volume (m3/min) 480-550;

　　Total dust removal efficiency (%) ≥ 97;

　　Respiratory dust removal efficiency (%) ≥ 80;

　　Liquid to gas ratio (L/m3) ≤ 0.2;

　　Work noise [dB (A)] ≤ 85;

　　Air leakage rate (%) ≤ 5;

　　Working resistance (Pa) 2000;

　　Fan voltage (V) 380/660/1140;

　　Explosion proof mark Exd Ⅰ;

　　Host weight (kg) 1755;

　　Dimensions (mm) (length x width x height) 3800 x 1200 x 1000

　　Our factory produces and sellsMining wet dust removal fanFeaturing multiple power levels ranging from 4KW to 55KW and various models, the iron team creates a golden brand,KCS-500D Mining Wet Dust Removal FanPassion casting purification channel,30KW mine dedusting fan spray dedusting air volume is largeIt cannot accommodate a single particle of dust, and the dust removal effect cannot be taken lightly. 48 models, there is always one that suits you. Shandong Hongyi looks forward to your inquiries and cooperation!

AfterSalesService :

• Mining wet dust removal fan