2020 ZBQ27 Pneumatic Grouting Pump for Injecting Cement Slurry in Hongyi Coal Mine

Description :

　　ZBQ27Pneumatic grouting pump, coal mine pneumatic grouting pump, horizontal bar pneumatic grouting pump

　　ZBQ27/1.5Pneumatic grouting pumpStrive for excellence in every detail,ZBQ27/1.5Pneumatic grouting pumpFocus on reducing costs without compromising quality.Pneumatic grouting pump for coal minesSuitable for coal mines, easy and convenient to operate.

　　ZBQ27/1.5Pneumatic grouting pumpInstructions for Use

　　Pneumatic grouting pump for coal minesFunction: Mainly used for waterproofing, reinforcement and grouting engineering of coal mines, iron mines and other wellbore walls, as well as grouting and water blocking and solidification engineering of fractured rock layers in subways, tunnels, water conservancy, buildings and other areas. This pump uses compressed air as power and has the characteristics of small size, light weight, and no overload. It can be used in places that are flammable, prone to strong magnetism, radiation, dusty, have large temperature changes, and are exposed to water.

　　ZBQ27/1.5Pneumatic grouting pumpModel representation:

　　2.1 Form:

　　The grouting pump is a plunger reciprocating single liquid grouting pump

　　2.2 Model

　　ZBQ—27/1.5

　　Main parameters: Discharge flow rate (L/min)/discharge pressure (Mpa) at 0.5Mpa

　　Feature code: Power source type: Q - Pneumatic

　　Type code:Pneumatic grouting pump for coal mines

　　ZBQ27/1.5Pneumatic grouting pumpBasic Parameters

　　Product Model: ZBQ-27/1.5 (Basic Type)

　　Working pressure: 0.2~0.8MPa

　　8 major slurry discharge pressures: 4MPa

　　Discharge flow rate: 27L/min

　　Pneumatic grouting pump for coal minesRepetition frequency: 148 times/minute

　　Gas consumption: 0.5m3/min

　　Basic parameters of the slurry discharge cylinder (inner diameter x stroke): 50x100mm

　　Pneumatic grouting pump for coal minesOperating temperature: -15 ℃~60 ℃

　　Dimensions: 1100x207x330mm

　　ZBQ27/1.5Pneumatic grouting pumpPrinciple: Compressed air enters the cylinder through a ball valve, a binary air source, and a two position five way directional valve, pushing the cylinder piston to make reciprocating motion. Due to the connection between the cylinder rod and the slurry cylinder rod, the reciprocating motion of the cylinder piston also drives the reciprocating motion of the slurry cylinder piston to complete the suction and discharge action. The direction change is controlled by a dial installed on the cylinder rod, which moves the stroke valve back and forth to change the direction of the cylinder's intake and exhaust, and continuously completes the reciprocating motion of the cylinder piston.

　　ZBQ27/1.5Pneumatic grouting pumpform:

　　The model is ZBQ27/1.5 (or QB152), and the components of the QB152 portable grouting pump include: cover nut, upper nut, cylinder block, internal hexagonal screw, nut, intake port, discharge port, pump body part, grouting part, and intake port.

AfterSalesService :

• ZBQ27 Pneumatic Grouting Pump