ZNF-50 Pneumatic Vibrator, Vibration Rod, Pneumatic Concrete Vibrator, Pneumatic Motor

Description :

　　ZNF-50Pneumatic vibrator, vibrating rod, pneumatic concrete vibrator - air motor

　　minorityZNF-50 Pneumatic Concrete VibratorProduction companies will be accepted by customers for a long time because most companies are not serious. We doMining concrete pneumatic vibratorSerious, inferior products are hated by everyone, while high-quality and affordable products are loved by everyone. The ZNF-50 concrete wind-driven vibrator, also known as the wind-driven insertion type concrete vibrator, is mainly suitable for compacting concrete construction in highways, bridges, tunnels, airports, power stations, and urban industrial and civil construction. It can also serve as a vibration source for vibration equipment. Especially suitable for construction in environments with gas.

　　1ZNF-50 Pneumatic Concrete VibratorTechnical Specifications:

　　Model ZNF50

　　Rated speed 3000r/min

　　Use air pressure of 0.4-0.5MPa

　　Vibration frequency (Hz) 200

　　Load gas consumption 1.5-1.7m3/min

　　Inlet pipe inner diameter 25mm

　　Amplitude 1.15mm (mm)

　　IIMining concrete pneumatic vibratorStructure and working principle:

　　The structure is divided into two parts: power and vibration rod. The power part adopts a blade type air motor as the flexible shaft of the vibration rod and the floating insertion connection of the air motor shaft head. After rotating the wrench, it is fixed and the screws are tightened.

　　1. The pneumatic motor is composed of a rotor, cylinder, upper and lower end caps, bearings, etc.

　　2ZNF-50 Pneumatic Concrete Vibrator Air MotorAdopting the pre intake side blowing method, compressed air enters the cylinder through the main air duct, pushes the blades, and drives the rotor to operate and do work.

　　3. There are 6 ventilation openings on the main air duct of the cylinder, and 32 exhaust holes are arranged in a staggered manner to ensure even blade wear

　　4. In order to relatively increase the blade width and extend the service life, five radial equal air grooves on the rotor are formed into R75 circular arc grooves, and blades are matched inside the grooves.

　　5. The upper and lower end covers of the pneumatic motor are respectively designed and installed with one single row radial ball bearing (203305) to withstand axial torque. There is a J-shaped skeleton sealing ring at each lower end cover to prevent compressed air from flowing down inside the pneumatic motor, effectively ensuring the reliability, stability, and service life of the pneumatic motor transmission.

　　IIIZNF-50 concrete pneumatic vibratorPerformance characteristics:

　　The plug-in vibrator motor adopts a dedicated motor, which is small in size, light in weight, and easy to carry. It has a unique push key anti reverse device and reliable anti reverse.

　　Some conservative corporate images and behaviors cannot conceal their abandonment of traditionZNF-50 Pneumatic Concrete VibratorIt is necessary to promise that the nameplate power must be consistent with the actual power. Copper core enameled wire (made of oxygen free copper rod drawing): cold-rolled silicon steel sheet (made of non removable electrical silicon steel sheet): "CCC" switch (designated product by the "CCC" product certification agency for electric tools): Other bearings, cables, standard parts, etc. Each workpiece is carefully selected by the vibration engineer. While ensuring that the motor power reaches or exceeds the actual rated power, it can also ensure the coordination between the motor speed and the vibrating rod, thereby maximizing the extensionMining concrete vibratorThe lifespan ensures the product's cost-effectiveness advantage among peers.

AfterSalesService :

• Pneumatic vibrator