The SY-40 single hydraulic prop pressure gauge has accurate detection. The 2020 single hydraulic prop pressure gauge is in stock

Description :

　　SY-40Single pillar pressure gauge, single hydraulic pillar pressure gauge, pressure gauge manufacturer

　　Your opinion onSY-40 Single Pillar Pressure GaugeIf you have a need, we will meet it and provide assistanceSY-40 Single Pillar Pressure GaugeHigh service level,Single hydraulic prop pressure gaugePutting customers first, only with a large number of customers can a business thrive.

　　SY-40Single pillar pressure gaugeThe pressure boosting instrument, also known as the external balance instrument, is used to detect the initial support force (working resistance) of a single hydraulic pillar. Its main feature is to gradually increase the pressure by opening the three-way valve ball to ensure that the single hydraulic pillar does not leak or unload. The entire detection process changes slowly, reducing the impact on the pressure gauge and extending its service life.

　　SY-40Single pillar pressure gaugeTechnical Specifications:

　　1. Range: 0-40/60MPa

　　2. Accuracy: 2.5% F/S

　　three Single hydraulic prop pressure gaugeDisplay mode: pointer type

　　4. Weight: 1.5kg

　　SY-40Single pillar pressure gaugeProduct Features:

　　It has the advantages of easy use, reasonable structure, innovative ideas, and accurate testing.

　　Single hydraulic prop pressure gauge|Operation method of SY-40/60 pillar force and pressure gauge:

　　1. After adding emulsion to the liquid cylinder, tighten the cover of the storage cylinder and tighten the U-shaped clamp onto the three-way valve. The storage cylinder should be basically above the instrument, and the handle should be pressed back and forth. During this period, the pressure on the pressure gauge rapidly increases. When the pressure suddenly drops and stops rising, it indicates that the high-pressure liquid has opened the one-way valve (spherical) of the three-way valve.

　　2. At this point, the pressure indicated on the pressure gauge is the pressure inside the pillar. After recording the pressure value indicated on the pressure gauge, release the handle and the detector will immediately release pressure. Rotate the U-shaped card clockwise to remove the detector.

　　SY-40Single pillar pressure gaugePrecautions for use:

　　The plunger should be fully retracted after use; The liquid in the storage tank should be kept clean to prevent impurities from damaging the sealing device. The fitting between the detector and the three-way valve should be cleaned to avoid blocking the liquid outlet of the detector.

　　SY-40Single pillar pressure gaugecommon problem:

　　Single hydraulic prop pressure gaugeA common fault is that the pressure cannot be increased due to the loose locking sleeve or damaged sealing ring. First, tighten the locking sleeve. If the pressure still cannot be increased, remove the plunger and check whether the sealing ring and retaining ring are damaged. When removing the plunger or other components, care should be taken not to touch any impurities such as granular dirt.

　　a kind ofSY-40 Single Pillar Pressure GaugeThe pressure gauge comprises a pressure gauge housing, a pointer, a panel, a movement component, and a base, characterized in that the pointer and the panel are fixed on the movement component, the pressure gauge housing comprises a front cover, a back cover, and a transparent cover, the front cover and the back cover are connected by threads, the transparent cover is located between the front cover and the back cover, the movement component is located inside the back cover, the base is a tube body with a through hole in the middle, a limit ring is provided on the outer side of the base, a connecting rod is provided inside the base, the connecting rod is connected by threads to the through hole, the connecting rod is provided with a connecting hole, and the connecting hole penetrates the connecting rod. The movement component is provided with a threaded extension, which penetrates the bottom of the pressure gauge housing and is fixed in the connecting hole, The base is also equipped with a snap ring, which is sleeved on the outer side of the base and has a slot.

AfterSalesService :

• SY-40 Single Pillar Pressure Gauge