Sihai brand industrial coatings require less defoaming agent
Category:
fine chemicals /surface active agent /Foaming defoamer
Model:
SH-Z
Brand:
all corners of the world
brand:
all corners of the world
model:
SH-Z
Product Name:
Sewage defoamer, used for water treatment defoamer
main ingredients:
Polyether modified silicon
category:
Industrial grade defoamer
main purpose:
Water based coatings, industrial coatings, defoaming effect in industrial production
solid content:
10-99%
Operating temperature:
Within 0-120 degrees
flash point:
0
specific gravity:
zero point nine eight
Recommended dosage:
One ten thousandth to three ten thousandths
Product storage and transportation:
Storage below 35 degrees Celsius
Packing Specification:
20/50/200 kg per barrel
Place of Origin:
Hubei
manufacturer:
Hubei New Four Seas
Retail Price
Negotiable
重量
kg
- Product Description
-
brand all corners of the world
model SH-Z
Product Name Sewage defoamer, used for water treatment defoamer
main ingredients Polyether modified silicon
category Industrial grade defoamer
main purpose Water based coatings, industrial coatings, defoaming effect in industrial production
solid content 10-99%
Operating temperature Within 0-120 degrees
flash point 0
specific gravity zero point nine eight
Recommended dosage One ten thousandth to three ten thousandths
Product storage and transportation Storage below 35 degrees Celsius
Packing Specification 20/50/200 kg per barrel
Place of Origin Hubei
manufacturer Hubei New Four Seas
Description :
With the rapid development of economy, our living environment is constantly changing. Water resources are one of the important resources on which we rely for survival. However, sewage is always produced in life and industrial development, especially in industrial production. All discharged sewage must be subject to purification treatment, but in the process of sewage treatment, there will be a lot of foam, and foam will have an impact on the sewage treatment process. Only by adding water treatment defoamer to remove the foam in the sewage, can we meet the national standards, discharge standards, and minimize environmental pollution. In response to these situations, our company has developed sewage defoamers, polyether modified silicone defoamers, and polyether defoamers, which have the characteristics of fast defoaming speed, low dosage, and low cost.
Introduction to defoamer products for leachate from garbage
Basic characteristics
Composed of liquid hydrocarbons and dispersants;
Does not contain silicone oil, mineral oil, wax, etc;
2、 Typical data
indicator
Physicochemical properties
test method
appearance
Colorless to slightly yellow transparent liquid
visual estimation
PH value
6.0~9.0
Precision pH test paper (1% aqueous solution)
Viscosity (25 ℃)
80~1000mPa·s
GB/T 5561-
dispersion
Can self emulsify and disperse in water
——
Note: The above data is for reference only and should not be used as technical indicators;
3、 Application Fields
Suitable for sewage treatment and landfill leachate;
Building materials industry defoaming, water reducing agent defoaming;
4、 How to use
SH_237_7 can be directly added to landfill leachate to eliminate foam, or it can be diluted with water or foaming liquid to form a uniform solution and then added to the foaming liquid. After dilution, it should be used up as soon as possible.
5、 Packaging and Storage
This product is packaged in 25L or 200L plastic drums, or customized according to customer requirements. Please store at 5-35 ℃ and avoid direct heating. If there is a fire, extinguish it using general petroleum product methods.
Under the condition of unopened packaging at a temperature of 10-30 ℃, the shelf life is 12 months from the date of production.
AfterSalesService :
Key words:- Industrial coating defoamer
More Products
