Online suspended solids detector, water quality SS real-time monitoring, suspended solids online analyzer

Description :

　　Online suspended solids detector

　　SS monitoring device

　　1. Online suspended solids detectorProduct Configuration

　　Please confirm if the packaging box of the detector you purchased is complete. If there is any packaging damage or shortage of any accessories, please contact the responsible person as soon as possible. The configuration is as follows

　　Standard Configuration

　　◇ One instrument

　　◇ One suspended solids sensor

　　◇ Tighten two locking strips

　　◇ One user manual

　　optional

　　◇ Installation bracket (1 meter long)

　　◇ 485 communication interface and 485 to 232 or 485 to USB connector

　　24-hour real-time monitoring

　　2. Introduction to online suspended solids detector products

　　Suspended solids refer to the degree of obstruction caused by suspended substances in water to the transmission of light. Water containing soil, silt, fine organic matter, and other microorganisms and colloids can cause turbidity in the water. The light waves emitted by the transmitter on the sensor are absorbed, reflected, and scattered by the measured object during transmission, and a portion of the transmitted light can be directed towards the detector in the 180 ° direction. The intensity of the light received by the detector is related to the suspended solids value of the measured sewage, so the suspended solids value of the sewage can be calculated by measuring the intensity of the transmitted light. Widely used for monitoring suspended solids in solutions such as chemical, electroplating, papermaking, environmental water treatment engineering, pharmaceuticals, food, tap water, etc. Especially suitable for use in the wild and on-site.

　　Key Features:

　　The sensor housing is made of 316L stainless steel, which has good corrosion resistance.

　　The turbidity sensor is not affected by sample flow rate and pressure.

　　The infrared light waves emitted by the transmitter on the sensor use a stable invisible near monochromatic infrared light source, which avoids the interference of chromaticity in the liquid and visible light from the outside on the sensor measurement.

　　The sensor uses a quartz glass lens with extremely high transmittance on the optical path, which makes the emission and reception of infrared light waves more stable.

　　The instrument adopts a brand new waterproof, dustproof, and moisture-proof shell (IP65) technology, with a surface painting process and a generous appearance.

　　◇ Wide range, stable measurement, high accuracy, good reproducibility, and strong anti-interference ability.

　　Communication function: Equipped with RS-485 communication interface (partially compatible with MODBUS protocol) (optional); Optoelectronic isolation with 4-20 mA current output, the corresponding value can be set arbitrarily.

　　◇ The function of setting the hysteresis value arbitrarily avoids frequent actions of the switch relay, and has the function of setting the switch value to turn off and off.

　　◇ Adopting two-point calibration method, the instrument range can be modified.

　　Watchdog function: Ensure that the instrument panel does not crash.

　　◇ Power failure protection>10 years.

　　water quality monitoring

　　3. Technical specifications of online suspended solids detector

　　1. Measurement range: 0-10000mg/L, customizable range

　　2. Resolution: 0.01%, 0.1 ℃

　　3. Accuracy: ± 1.0% FS, ± 0.5 ℃

　　4. Repeatability: ± 1.0%

　　5. Control interface: Two sets of ON/OFF relay contacts, divided into high and low point alarm signal photoelectric isolation outputs.

　　6. Signal isolation output: Optocoupler isolation protection 4-20mA signal output

　　7. Relay: Relay hysteresis can be set arbitrarily, relay load 3A 220VAC/24VDC

　　8. Working conditions: The ambient temperature is 0-60 ℃, and the relative humidity is ≤ 90%

　　9. Output load: load<500 Ω (0-10mA), load<750 Ω (4-20mA)

　　10. Working voltage: AC 220V ± 10%, 50/60Hz (instrument), DC 12v (sensor)

　　11. Size: 96 * 96 * 168mm (instrument) 237 * φ 64mm (sensor)

　　12. Hole size: 92 * 92mm

　　13. Weight: 0.9kg (instrument) 2.0kg (sensor)

　　14. Protection level: IP65 (instrument) IP68 (sensor)

　　Suspended solids online analyzer

AfterSalesService :

• Online suspended solids detector