Electronic balance 220g laboratory calibrated one ten thousandth electronic analytical balance

Description :

1、 Overview of JC-TP1204 One in Ten Thousand Electronic Balance

　　JC-TP1204 One in Ten Thousand Electronic Balance is produced strictly in accordance with the standard GB/T 26497-2011, with four corner offset error and repeatability error being twice as small as the standard! It can meet the requirements of customer experimental analysis and meet the needs of enterprise QS certification.

　　This series of analytical scales uses wireless sensors that do not require buttons. Simply wave your hand above the sensing window to control the peeling and calibration functions, avoiding corrosion of the buttons by sample residues and extending the product's service life;

　　Calibrating precision scales, the induction window function can effectively prevent vibration caused by direct contact with the balance buttons by hand, making calibration more accurate;

　　Large LCD backlight display, concave side facial mask decoration, highlighted edges and corners, bevels, flat matte decoration, beautiful appearance, full of contemporary flavor;

　　Built in RS232 standard interface, compliant with GLP standards, can be connected to printers, weighing hooks under computers, and meet the requirements of large volume weighing;

　　This series of analytical balance products has high cost-effectiveness, with functions such as unit conversion, counting, and percentages. Linear multi-point calibration ensures more accurate and reliable experimental data. Adjustable zero point tracking and automatic peeling ensure more convenient and efficient use.

2、 JC-TP1204 Type One in Ten Thousand Electronic BalanceFeatures:

　　1. Humanized design, transparent glass windproof cover, making the viewing angle clearer and wider.

　　2. Electromagnetic force sensor ensures the accuracy of weighing.

　　3. It has linear calibration, automatic temperature compensation, automatic zeroing, and overload protection functions.

　　4. It has functions such as piece rate, unit conversion (grams, milligrams, carats, ounces, weights, etc.), peeling, zero point tracking, etc., with simple and fast operation.

　　5. Built in RS232 output interface, no need to purchase additional software. You only need a data cable to directly connect to external devices such as computers and printers, observe weighing changes in real time on the computer, and save weighing data on the computer, providing data support for experimental analysis. The operation is simple and easy to understand, and there is no need to set additional serial port protocols.

IIIJC-TP1204 Type One in Ten Thousand Electronic BalanceProduct Parameters

4、 JC-TP1204 Type One in Ten Thousand Electronic BalanceInstrument installation:

　　1. Working environment: The electronic balance is a measuring instrument, so the installation position of the instrument should pay attention to:

　　The installation platform is stable and flat, avoiding vibration;

　　Avoid direct sunlight and heat, and avoid working in environments with high humidity;

　　Avoid direct air circulation channels.

　　2. Balance installation: Strictly follow the instrument manual for operation.

5、 JC-TP1204 Type One in Ten Thousand Electronic BalanceBalance usage:

　　1. Leveling: Before turning on the balance, observe whether the water bubble in the level gauge at the back of the balance is located in the center of the circular ring. Otherwise, adjust it with the foot bolts of the balance to raise it to the left and lower it to the right.

　　2. Preheating: When the balance is powered on for the first time or after a long period of power failure, it needs at least 30 minutes of preheating time. Therefore, laboratory electronic scales should not be frequently powered off under normal circumstances.

　　3. Weighing:

　　Press the "power on/off" button to turn on the monitor;

　　Wait for the instrument to self check. When the screen displays zero, the self-test process ends and the balance can be used for weighing;

　　Place the weighing paper and press the Tare button on both sides of the display screen to remove the skin. When the display shows zero, add the reagent to be weighed onto the weighing paper.

　　After weighing, press the "power on/off" button to turn off the display.

AfterSalesService :

• electronic balance