Fluoride ion analyzer online real-time monitoring of fluoride ion content in water Fluoride ion detector

Description :

　　Fluoride ion analyzer

　　24-hour real-time monitoring

　　1、 Product Introduction

　　The SZ-F+fluoride ion online measurement and control instrument adopts the imported fluoride ion selective electrode method (ISE method), which has high sensitivity, rapid signal response, accurate measurement, stable performance, and simple maintenance. This measurement and control system has the characteristics of easy use, high accuracy, and economy. Using this series of analytical techniques to ensure the stability, reliability, and accuracy of the instrument's long-term operation. It has functions such as Chinese menu operation and 485 communication.

　　Used for continuous monitoring and control of fluoride ion content in water solutions in drinking water treatment plants, canning plants, drinking water distribution, swimming pools, cooling circulating water, water quality treatment projects, etc.

　　Online ion detector

　　2、 Main features:

　　◇ Large screen dot matrix LCD display, Chinese menu operation.

　　Simultaneous display of multiple parameters: fluoride ion value, temperature, output current, etc. are displayed simultaneously, which is intuitive and easy to read, and there is a range overrun prompt.

　　◇ There is a function to restore factory settings.

　　◇ Manual/automatic temperature compensation function.

　　Communication function (optional): Equipped with RS-485 communication interface (partially compatible with MODBUS protocol), the fluoride ion value corresponding to 4-20 mA current output can be set arbitrarily.

　　◇ Optoelectronic isolation 4-20mA current output.

　　◇ The function of setting the hysteresis value arbitrarily avoids frequent actions of the switch relay, and has the function of setting the switch value to turn off and off.

　　Watchdog function: Ensure that the instrument panel does not crash.

　　◇ Power failure protection>10 years.

　　Fluoride ion content monitor

　　3、 Technical indicators

　　1. Measurement range: fluoride ion: 0-20000 mg/L (ppm), temperature: 0-60 ℃

　　2. Resolution: 0.01mg/L, 0.1 ℃

　　3. Accuracy: better than ± 3%, ± 0.5 ℃

　　4. Manual/automatic temperature compensation function (0-60 ℃).

　　5. Control interface: Two sets of ON/OFF relay contacts, divided into high and low point alarm signal photoelectric isolation outputs. The third group of relays: automatic cleaning control function analog output.

　　6. Signal isolation output: Optocoupler isolation protection 4-20mA signal output.

　　7. Relay: The hysteresis of the relay can be set arbitrarily, and the relay load is 3A 220VAC/24VDC.

　　8. Working conditions: ambient temperature of 0-60 ℃, relative humidity ≤ 90%

　　9. Output load: load<500 Ω (0-10mA), load<750 Ω (4-20mA)

　　10. Working voltage: 220VAC ± 10%, 50/60Hz

　　11. Size: 96 × 96 × 156 mm

　　12. Hole size: 91 × 91mm

　　13. Weight: 0.9Kg

　　14. Protection level: IP65

　　Water Quality Tester

AfterSalesService :

• Fluoride ion analyzer