Ammonia nitrogen analyzer probe type 485 communication and various variable output ammonia nitrogen online monitoring instrument

Description :

　　Amtax Compact

　　Probe type

　　1Amtax Compact Product Introduction:

　　The ammonia nitrogen content ion analyzer mainly uses the ion selective electrode measurement method to achieve accurate detection. The electrode has an ion selective membrane that reacts with the corresponding ions in the sample being tested. The membrane is an ion exchanger that changes the membrane potential by reacting with the ion charge, allowing for the detection of the potential between the liquid, sample, and membrane. The difference between the two potential values detected on both sides of the membrane will generate current. The sample, reference electrode, and reference electrode liquid form a "circuit" on one side, while the membrane, internal electrode liquid, and internal electrode are on the other side.

　　The difference in ion concentration between the internal electrode solution and the sample will generate electrochemical voltage on both sides of the membrane of the working electrode. The voltage is led to the amplifier through the highly conductive internal electrode, and the reference electrode is also led to the location of the amplifier. By detecting an accurate standard solution with known ion concentration, a calibration curve can be obtained to determine the ion concentration in the sample.

　　When the measured ions in the solution come into contact with the electrode, ion migration occurs within the aquifer of the ion selective electrode substrate. The change in charge of migrating ions results in a potential change, causing a change in the potential between the membrane surfaces and creating a potential difference between the measuring electrode and the reference electrode.

　　4-20mA output

　　IICharacteristics of ammonia nitrogen analyzer:

　　LCD Chinese interface display, Chinese menu, easier and more convenient operation.

　　Good reproducibility, high accuracy, and good precision.

　　4-20mA transmission output, relay high and low alarm control output, RS485 communication output and other variable outputs, system intelligent control;

　　■ Dual relay upper and lower limit alarm output (optional)

　　Fully intelligent, multifunctional, high measurement performance, and strong environmental adaptability

　　■ Support customization of special functional requirements

　　real-time monitoring

　　threeTheTechnical parameters of ammonia nitrogen analyzer:

　　Ammonia nitrogen content resolution: 0.1mg/L

　　Measurement accuracy: 1% -3% calibration accuracy

　　Repeatability:<=0.03

　　Refresh time:<=2s

　　Range: 0.1-14000mg/L

　　Output signal: 4-20mA, 485, relay

　　Power supply: AC220V/DC24V

　　Water Quality Tester

AfterSalesService :

• Amtax Compact