Multi parameter detector for oil and gas recovery developed by manufacturer in compliance with new national standards
Category:
Transportation/Gas station equipment/Oil and gas recovery equipment
Model:
LB-7035
Brand:
Qingdao Lubo Jianye Environmental Protection Techn
model:
LB-7035
type:
Oil drum/tank
Place of Origin:
Qingdao
manufacturer:
Qingdao Road Expo
Retail Price
40,000.00USD
重量
kg
- Product Description
-
model LB-7035
type Oil drum/tank
Place of Origin Qingdao
manufacturer Qingdao Road Expo
Description :
LB-7035 oil and gas recovery multi parameter detector(New National Standard)
technical indicators
technical indicators
parameter range
resolution
accuracy
traffic
(10～130)L/min
0.1L/min
Not exceeding ± 2%;
pressure
(0～2500)Pa
1Pa
Not exceeding ± 0.5% FS
Dimensions (length x width x height)
1200mm×450mm×500mm
Total weight
About 18kg
Electrical parameters
Working voltage DC9V~DC11V; Current 300mA; power consumption ＜ 5W
Explosion-proof rating
EX ib ⅡA T4 Gb
Qingdao Lubo manufacturer direct supply, affordable price, no middleman price difference, welcome to inquire, product manager: Fu Yajian
1.3 Working principle of oil and gas recovery system(1) The primary oil and gas recovery stage is the process of collecting the evaporated oil and gas during the unloading process into the oil tank truck and transporting it back to the storage tank for recovery and treatment, based on the principle of pressure balance. During the unloading process of the oil tanker, the pressure inside the vehicle decreases, while the pressure inside the underground storage tank increases. The pressure difference between the underground storage tank and the oil tanker causes the volatile oil and gas during the unloading process to return to the tanker through pipelines, achieving the goal of oil and gas recovery. After the unloading is completed, the pressure inside the underground storage tank and the oil tanker reaches equilibrium. At this time, the unloading port is closed to keep the oil tank and the oil tanker in a sealed state. Gasoline and oil and gas exchange between the two, ensuring that oil and gas do not enter the air.
(2) The secondary oil and gas recovery stage is an oil and gas recovery system that is carried out simultaneously with refueling. At this stage, vacuum assisted oil and gas recovery equipment is used to transfer the evaporated oil and gas during refueling through underground oil and gas recovery pipelines to underground storage tanks for oil and gas recovery. During the process of refueling a car at a gas station, the vacuum pressure generated by the vacuum pump is controlled at a gas-liquid ratio of 1 through equipment such as oil and gas recovery pipelines installed on the refueling gun 0 ～1. The requirement for the scope of 2 is to recover the volatile oil and gas during the refueling process into the oil tank. The secondary oil and gas recovery system is currently the main part of the oil and gas recovery renovation at gas stations, and it is also the focus of oil and gas recovery testing. (3) The tertiary oil and gas recovery system refers to the oil and gas discharge treatment device.
AfterSalesService :
Key words:- Multi parameter detector for oil and gas recovery
More Products
