Microwave leakage detector manufacturer Qingdao Lubo
Category:
Instrumentation/Non destructive testing instruments/Leak detector
Model:
ML-91VA
Brand:
Qingdao Lubo Jianye Environmental Protection Techn
model:
ML-91VA
type:
Electronic leak detector
Measuring principle:
See details
measurement object:
See details
measurement range:
See details
accuracy:
See details
sensitivity:
See details
Operating Temperature:
-50~80
power supply:
9V dry battery
Processing & Customization:
yes
weight:
About 2
Place of Origin:
Qingdao
manufacturer:
Qingdao Road Expo
Retail Price
6,500.00USD
重量
kg
- Product Description
-
model ML-91VA
type Electronic leak detector
Measuring principle See details
measurement object See details
measurement range See details
accuracy See details
sensitivity See details
Operating Temperature -50~80
power supply 9V dry battery
Processing & Customization yes
weight About 2
Place of Origin Qingdao
manufacturer Qingdao Road Expo
Description :
ML-91VA Microwave Leakage Energy Detector
Product Introduction
The ML-91VA microwave leakage energy tester adopts high-performance detection chips from the United States, dual probe broadband omnidirectional antennas, and performs performance optimization algorithms on the detected signals. Combined with modern microcontroller technology, the product has greatly improved in detection sensitivity, dynamic range, detection accuracy, frequency range, omnidirectional, response time, and other aspects. It can fully meet the leakage testing requirements of mobile base stations, WiFi hotspots, microwave ovens, industrial and microwave equipment, especially in the fields of medical and health care, labor protection, and environmental detection, with a wide range of applications.
operating frequency band
0.9GHz-10GHz
display
LCD display screen
Detecting power density dynamic range
53dB(0.1um/cm2-20wm/cm2）
detection accuracy
The testing error within the full dynamic range is less than ± 0.5dB
response time
Less than 50ms
omnidirectional
Horizontal roundness less than 1dB
Automatic alarm preset
Alarm when greater than 5mw/cm2 (can be changed according to user needs)
Dual probe selection
The large probe A covers 900MHz-4GHz,
Small probe B covers 4GHz-10GHz
power supply
9V dry battery
Operating Temperature
-500~800
(2) Operation steps
1. Set the work selection switch to the desired range.
2. Insert the plug of the microwave probe into the socket of the indicator.
3. Based on the frequency band of the microwave equipment leakage test and the value of the microwave efficiency calibration table for the bandwidth microwave leakage test, place the calibration knob dial of the microwave probe plug in the position of the calibration table.
4. Adjust the zero knob to make the meter display zero.
5. During testing, place the microwave probe into the tested field, and after the probe medium contacts the microwave equipment from far to near, rotate the probe until the meter reading indicates the power density.
After the test is completed, the work selection switch must be placed in the off position to cut off the power.
AfterSalesService :
Key words:- Microwave leakage energy detector
More Products
