Precautions for using the multi parameter detector for oil and gas recovery
Category:
Transportation/Gas station equipment/Oil and gas recovery equipment
Model:
LB-7035
Brand:
Qingdao Lubo Jianye Environmental Protection Techn
model:
LB-7035
type:
Oil drum/tank
Processing & Customization:
yes
Scope of Application:
( 10～130) L/min
Specifications and Dimensions:
( 500×450×1200) Mm length x width x height
Place of Origin:
Qingdao
weight:
About 18.0kg
manufacturer:
Qingdao Road Expo
Retail Price
36,500.00USD
重量
kg
- Product Description
-
model LB-7035
type Oil drum/tank
Processing & Customization yes
Scope of Application ( 10～130) L/min
Specifications and Dimensions ( 500×450×1200) Mm length x width x height
Place of Origin Qingdao
weight About 18.0kg
manufacturer Qingdao Road Expo
Description :
Qingdao Lubo manufacturer self-produced environmental testing instrumentsIntegrated sampler,air sampler ,X - γ dose rate meter,Personal radiation dosimeter,Alpha β surface contamination analyzer,Multi-channel gamma spectrometer,Neutron peripheral dose equivalent meter,Electric hot blast drying oven,CODConstant temperature heater,Portable gas dust and smoke sampling instrument calibration device,Intelligent electronic soap film flowmeter,Digital anemometer,Precision temperature and humidity meter,Precision noise spectrum analyzer,Ultrapure Water System,Portable turbidity meter,Ultrasonic cleaner,Handwheel stainless steel pressure sterilizer,current meter,Smoke blackness tester
Gas station oil and gas recovery equipment detector portable multi parameter oil and gas recovery detector
LB-7035 oil and gas recovery multi parameter detector
What should be noted during on-site inspection of oil and gas recovery
1. The oil and gas recovery refueling gun has a safety protection function. When refueling, it is required that the barrel be lower than the handle of the gun to avoid spraying oil and injuring people. When the barrel is higher than the gun handle, the refueling gun will automatically activate the protection function and close the refueling gun.
2. When refueling a fuel gun with a sealing cap, the sealing cap should be tightly attached to the car's fuel tank opening; When refueling a fuel gun without a sealing cap, the entire fuel barrel should be placed inside the car's fuel tank.
3. The fuel gun should be handled with care, and it is strictly prohibited to bump the fuel gun barrel.
After refueling, the refueling hose should be promptly coiled onto the pump island of the refueling machine to prevent being stepped on by personnel or crushed by vehicles. It is strictly prohibited to forcefully stretch the fuel hose.
When leakage is found in the fuel gun, fuel hose, break valve, oil and gas separator and other parts, the machine must be stopped immediately. Gas stations should promptly report the area and contact personnel for repairs.
LB-7035 oil and gas recovery multi parameter detector
Technical Specifications
Main parameters
Parameter Range
resolution
Accuracy
flow range
(10～130)L/min
0.1L/min
≤2.5L/min
pressure
(0～2500)Pa
1 Pa
≤±1%
temperature
(-2～45℃
0.1℃
≤±3.0℃
humidity
(0～90RH
0.1%RH
≤±3%RH
power consumption
＜0.5W
standby time
Not less than 12 hours
display
5.7 inches
Overall dimensions
(500 × 450 × 1200) mm length × width × height
Total weight
About 18.0kg
Toolbox capacity
(Length 450 x Width 500 x Height 660) mm
tank capacity
70L
Oil outlet height
280mm(min)～800mm(max)
Explosion proof type
Exibd ⅡA T4
AfterSalesService :
Key words:- Multi parameter detector for oil and gas recovery
More Products
