Liangliang adhesive thermal insulation paint for the outer wall of aviation coal oil tanks in Laiwu City, Shandong Province

Description :

　　Cooling glue insulation paint

　　Composition characteristics:

　　This paint is composed of polymer synthetic resin, insulation material, hollow glass microspheres, pigments, fillers, and additives (excluding heavy metal elements such as lead).

　　Performance and Usage:

　　This paint is a new type of insulation material that uses a thin coating layer to achieve insulation and cooling effects. Especially in high-temperature environments during summer, liquefied gas tanks, oil tanker trucks, oil storage tanks, and various chemical raw material tanks can reduce the energy consumption required for original cooling measures (such as using spray devices to keep oil tanks at a certain lower temperature in high-temperature environments during summer), and improve the environment. This product mainly utilizes special components in the paint film, such as insulation materials, whitening agents, polymer resins, etc. The insulation effect is achieved by isolating and reflecting heat such as sunlight, which creates a significant temperature difference between the surface and interior of the object, reduces temperature, and has good insulation effect. At the same time, it has a good anti-corrosion effect on the metal surface and exterior. The appearance has a good anti-corrosion effect

　　1. Cold glue thermal insulation primer has replaced traditional red lead anti rust paint, with the addition of rust inhibitors, rust inhibitors, rust prevention materials, and thermal insulation fillers in the primer.

　　2. Cold glue insulation intermediate paint has good adhesion between the bottom and surface, while enhancing the anti-corrosion effect.

　　3. Cold glue insulation topcoat is applied to the surface layer to provide insulation, anti-corrosion, reflection, and can replace spraying, with high-performance anti-corrosion effect.

　　Color: predominantly white

　　Construction technology:

　　1. Steel structural components and non-metallic surfaces can be coated without rust, oil, dust, etc.

　　2. Brush coating, spray coating, and roller coating methods can be used

　　3. When used on old equipment, it is necessary to remove loose and detached old paint skin, rust layer, dust, oil stains, etc., and use a polishing machine or wire brush to polish with sandpaper. The intact old paint skin can be retained for painting.

　　4. For severely corroded steel surfaces, a coat of 70-T rust coating or 88-1 degreasing and phosphating solution can be applied. After 24 hours of drying, the coating can be applied again.

　　5. The interval between painting is 24 hours after the primer is applied, followed by the intermediate paint and topcoat. Each coat of paint should be spaced 24 hours apart.

　　6. During construction, attention should be paid to preventing rain, and surfaces with dew should not be painted. Keep in a fireproof, ventilated, and dry place

　　Packing Specification:

　　Main paint 20kg/barrel curing agent 4kg/barrel

　　Proportion: 5:1 (weight ratio)

　　Thermal insulation paint, Liangliang adhesive thermal insulation paint, aviation kerosene tank outer wall thermal insulation coating, Laiwu City, Shandong Province

AfterSalesService :

• Cooling glue insulation primer